Parts & Accessories

This water bottle enclosure is designed to insulate and prevent water from freezing when riding in cold conditions. - Waterproof, 5.5mm neoprene construction with nylon lamination inside and outside - Includes: plastic cage, Allen key, screws and washers - Fits and encloses up to an average 20oz bottle and has enough room for a heat pack - Extended zipper pull for easy open close while riding with winter gloves - Reflective material on logo

BiKASE's Handlebar/Seat Post Bottle Cage Bracket makes it easy to attach a bottle cage and bottle (both sold separately) to your handlebars or seat post. It's made of durable engineered plastic polymers and includes shims and hardware to fit on handlebars and seat posts with 24 to 32mm diameters or 32mm to 43mm diameters. It also rotates so you can set the bottle where you want it for easy access. • Material: POM head, PP bracket, Stainless steel hardware • Size: 8cm x 6cm x 2cm • Weight: 40 g • Fits handlebar 24mm-32mm • Versatile bracket rotates

Mount any water bottle cage using our Cage Strap Adapter to any diameter of 3.25" or less. This will allow you to mount a water bottle in all kinds of different areas on your bike—you choose what is best for you! The extra-wide length can be cut to your desired length. The Adapter won't move around because it has a rubber base and compresses on your frame when mounted.

Update or replace your lumbar reservoir. This 3-liter lumbar reservoir is just like the one that comes in our mountain bike hydration packs. The 100-ounce design includes a wide mouth for easy filling and a high-flow valve for efficient drinking. - 3L / 100 oz Dakine x Hydrapak 3D lumbar reservoir w/quick disconnect - Blaster high-flow bite valve w/ shut-off - Quick-disconnect tubing for easier refills - Molded 3D bottom provides better shape inside pack - Molded 3D bottom for much better drying between rides

Bottle cage support for fitting on frames that don’t have specific fixing holes, or to increase the standard number of bottle cages. Compatible with tubes having diameter from 25 mm to 70 mm (from 1 to 2.8 inch)

Switch your TWIST Bottle from bike to bike with an extra TWIST Bike Base. Includes TWIST Bike Base and screws for mounting to standard braze-ons. Make sure to use the provided screws when attaching your Bike Base. Compatible with all TWIST Bottles. - Includes TWIST Bike Base and screws for mounting to standard braze-ons - Compatible with all TWIST Bottles

Thanks to the modular TWIST system an exchange of the single parts is done in no time. If base and replacement bottle are still at hand, the TWIST bottle connector is also available separately. The bottle connector is suitable for all TWIST bottles with a belt as well as TWIST bases. Fitting the new connector is simple: insert the connector into the recess of the TWIST replacement bottle and lock with a coin. - Suitable for all TWIST bottles with a belt - Fits all TWIST bases

TWIST Bottle Connector for TWIST 450, 590, 600, and 750 Bottles. Not compatible with TWIST 800 or KEEGO Bottles. Easily attach your new connector by placing it in the Connector indent on your Bottle and locking it in with a coin. Replace your connector on your existing set or add to a Replacement Bottle. - Compatible with TWIST 450, 590, 600, and 750 Bottles - Not compatible with TWIST 800 or KEEGO Bottles - Compatible with all TWIST Bases: Bike Base, Tex-Base, and Uni-Base

If your thread inserts are already blocked or your bike does not even have any, the TWIST products can be mounted to the bike with the TWIST uni base, the universal bottle holder. It can securely fastened with the aid of two zip ties. On the top tube, the down tube, or the saddle tube – the TWIST uni base can be attached anywhere on the frame. - Compatible with frame tubes with a width of 28-62 mm - Rubber back for frame protection - Compatible with all TWIST Bottles - Attach and detach with ease

Upgrade your adventure with the TWIST Universal Connector + Bike Base. By combining the TWIST magnetic system you love with the Boa® Fit System, any bottle turns into a Fidlock bottle. Use this system to carry your hydration, energy bars, or even your speaker for some tunes on the trail. Includes TWIST Bike Base and screws for mounting to standard braze-ons. Make sure to use the provided screws when attaching your bike base. TWIST Universal Connector with Boa - Compatible with all TWIST Bases - Can hold items with a diameter of up to 80mm/3.14in - Anti-slip inlay for strong hold TWIST Bike Base - Compatible with all TWIST Bottles

The new, low-gravity horizontal bladder has a 2L hydration capacity, and ships with a tube and 45° bite valve. The tube is 1m in length, providing better flow, the bladder is burst tested, and it is FDA and EU approved, meaning that it is Phthalate, BPA, and PVC-free. With a hose connector that has a push-lock function and auto shut-off valve, the bladder also has a tethered top hanging clip and hanging loops that allow you to dry it. - 2.0L / 70oz - Horizontal, low-gravity bladder - Hanging loops for drying — inside and outside the bladder - Tethered top hanging clip - 1m length tube with better flow - FDA and EU approved: Phthalate, BPA and PVC-free - Burst tested - Push-lock hose connector with auto shut off valve - Ships with 45° bite valve

Staying hydrated is basic safety! Mental and physical performance drops quickly when you run out of liquids. Stay hydrated and stay fast with this hands-free hydration kit.

Lezyne's Flow Caddy is a lightweight, rigid container that fits into any Lezyne and most other bottle cages, and serves as universal storage for a patch kit, multi-tool, extra tube, or phone. The Flow Caddy features a large opening which provides quick and easy access to contents and a secure screw-top.

Durable, fiber reinforced Composite Matrix construction. Optimized side-load shape for easy bottle access in compact frames (right side configuration only). Integrated storage container below the cage with CO2 cartridge holders on both sides of the cage. Engineered to hold bottles securely. Oval mounting holes allow fine tuning of position on frame. - Weight: 94g

Sleek water bottle shaped organizer that fits into standard bottle cages. Internal compartments, including one zippered, organize small cycling essentials—including tire repair, snacks, personal items and more. It features a soft, semi-rigid shell that’s durable and water resistant. A full zipper allows for a full 180° opening, providing easy access and better organization. Its all black design, with black logos, matches with all styles of bicycles.

Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter

Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter

Longneck grip-styled coozie accommodates 12 to 16oz cans.

- Insulated koozie designed for 12 oz cans - Made for Origin8 by Bomber Jacket - Made of Premium 4mm neoprene - HD dye-sublimation print for long-lasting graphics - Reduces rate of warming by 50% - Collapsible design - Gold Alloy Zippers - Color: Speed

Increase your hydration capacity with Origin-8's HydroRail Double Seat Bracket. This bracket mounts to your saddle rails and holds two bottle cages. And, the angle is fully adjstable so you can customize it to keep your bottles within easy reach. Bottles and cages sold separately.

Ortlieb O-Strap Adjustable Rubber Strap - 190mm - Black - Soft material keeps items secure and helps prevent scratching

Adapter for direct mounting of the Fuel Pack or other equipment with screw connections. Are you planning to mount the Fuel-Pack or a bottle holder on your bike but find the threaded holes are not in the right place? The Offset-Plate 64 MM gives you a flexible way of adjusting the position of the Fuel-Pack, a bottle holder or other equipment with screw connections.

Flexible option for fastening additional bottle holder or other accessories to the bike frame. Are the holes in your bike frame in the wrong place or already in use? Using the O-Strap Bottle Cage Mount, you can additionally attach bottle holders or other items of equipment wherever you want them. This practical accessory is suitable for tubes of up to 60 mm diameter, whether on the frame or other parts of your bike.

Park Tool's Mini Bottle Opener is made of durable, rustproof stainless steel and has Park's great-to-grip and attractive blue vinyl-coated handle. This handy tool fits on a keychain and has a bottle opener and 10mm open-end wrench built in.

Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.

Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.

All metal cup made of 304 Stainless Steel.

The BO-6 is a premium bottle opener modeled after our iconic PW-4 pedal wrench, with two offset wrench openings for optimal mechanical advantage and a long vinyl-dipped handle for maximum leverage. Made in the USA from laser-cut 304 stainless steel for a lifetime of use.

Profile Design bottle cage storage securely and conveniently uses your bottle cage as a cargo carrier. The screw-top, bottle-shaped containers carry necessities—whatever you need along the way.

SKS's Cage Box offers light, simple storage for your on-the-go essentials. With enough room for your tools, mini pump, and a tube, the Cage Box slides easily into your water bottle cage for a rattle-free, easy access storage solution.