Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

$19.99
Molded with Polycarbonate and Silicone rubber. Mounts to bike frame with rubber oring or use braze ons on bike. The 2 elastic bands will hold a phone, energy bar, pump, or sunglasses.
$16.99
• Rear mount • Fits 26" wheels
$74.99
A neoprene pogie designed to fit on handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands
$149.99
A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam
$14.99
Sunlite's Polo Seat Rail is the right part for mounting Sunlite's Polo Saddles on your favorite bike (Sunlite's Polo Saddles are sold separately and also sometimes called "banana seats"). To install, the seat's clamp fits onto the seatpost and the Seat Rail attaches to the rear wheel axle and the back of the Polo Saddle to support it. The Seat Rail has several mounting positions for getting your saddle in the most comfortable position. This sturdy-steel strut (also called a "sissy bar") boasts a beautiful polished-chrome finish to match your rig's smooth style. The 36-inch model has a built-in backrest that extends above the seat.
$19.99
Protect your frame from impacts, nicks, and scratches. - A clear self adhesive frame protector film (roll) - Roll size: 75mm x 1.5m x 0.2mm (thick), 2" x 60"
$48.00
Universal kit designed to fit all bikes and sizes. Includes 6 easy-to-trim pieces for top tube, downtube, chainstays, and seat stays. - 10 mil guards protect frame from scratches, chips and shuttle/cable rub - Applying to road or gravel bike? Simply narrow pieces to desired width using scissors or exacto knife - An affordable way to customize your bike with rad designs - Made in the USA
$39.99
• Aluminum double kickstand • Includes top plate • Adjustable for bikes from 24" to 700c
$249.99
FOR EXTRA COMFORT Upgrade to a cooler, more comfortable scooter-style ride with the Cito E+ Bench Seat. The height-adjustable feature lets you find the best seating position, while the additional padding makes for a seriously luxe ride. FEATURES: - Elongated seat designed with comfort in mind. - 3-height adjustment accommodates various rider heights, up to 190cm. - Compatible with 2023+ Cito E+. SPECIFICATIONS - Dimensions: 17.3"x7.1"x3.2"/44x 18x 8cm - Max load: 242.5lbs/110kg - Material: Aluminum - Weight: 5.3lbs/2.4kg
$59.99
Heavy duty aluminum double kickstand with 28mm-36mm adjustable length (from bottom plate vertically). Legs fold up to one side. Strong enough for cargo bikes and some e-bikes. Weight is approx 860g.
$19.99
- Easy to apply: Simply peel off and install - Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips and damage to your cranks - Durable, weatherproof 3M adhesive - 2-piece pack is designed to fit most cranks
$29.99
The solution for protecting your disc brakes during maintenance or transit. The patent pending eye catching design makes life simple, fast and easy to use, Muc-Off's disc brake covers help to ensure you won't have protectant or lube overspray on your discs. - Sold in pairs - Protects rotors from lubricant and brake oil - Fits all MTB and road rotors - Made from breathable neoprene - Rinse and hang dry after use
$2.29
Rep your ride with some sweet new Pure Cycles stickers! These sticker packs come with a random assortment of sticker designs and include roughly 4 stickers per pack. Think of it like a grab bag full of stickery awesomeness. Who knows what you'll find! Well you'll probably find stickers but you get the idea: Pure Cycles + Stickers = Awesome BOOM!
$12.99
- Designed to fit most lightweight, midweight, and cruiser bicycles - Fits frames with welded-on mounting plates - Made in the U.S.A.
$15.00
The Seltzer mount is designed to carry a standard bottle cage and two threaded CO2 cartridges, in a clean and compact way. - Holds one standard bottle cage - Accommodates two threaded CO2 cartridges, up to 25g - Can be installed directly to bottle cage mounts on frame - Bottle cage and cartridges sold separately
$24.99
Protect your frame from impacts, nicks, and scratches. - A clear self adhesive frame protector film (roll) - Roll size: 50mm x 1.5m x 0.2mm (thick), 2" x 60"
$21.95
Aluminum Direct Mount kickstands in KSA 40mm. These kickstands only work with bike frames designed for these kickstand standards. KSA 40 has two bolt holes 40mm apart. This particular KSA 40 design mounts inboard of the chainstay, not outboard.
$48.00
Our Kashima gold Geo Deco design is subtly classy, just like you. Frame protection is clear so your frame will be visible. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.
$48.00
Mid-century modern has finally escaped the living room and gracefully landed in our newest collection, Maze Runner. It’s our classiest design yet, available in three righteous colorways across our fender, frame keeper and topcap lineup. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.
$29.99
The Frame Mounting Block provides the critical connection from the Dash FM and Dash X FM to your bicycle. The mounting block is easily installed on bikes with round and oval frame tubes—simply snap the mounting rails into place, fasten the safety strap, and quickly get on your way. Pick up a spare mounting block to install on each of your bicycles for quick transitions.
$20.00
Further personalize your unique Surly bike with one of four Surly Make It Your Own Decal Sets, featuring alternative fonts and designs for the discerning rider. Stickers may also be affixed to helmets, mini fridges, dog food bowls, and more. - Decals are available in black or white - Each set includes decals for the down tube, chainstays, and fork blades, a Surly Make It -your Own seat tube icon, Surly headbadge, and a ’Natch frame sticker - Dry-transfer style
$8.00
Surly's Junk Straps can secure almost anything to almost anything else. Essentially an extra long toe strap, they're easy to use and store. And, trust us, these handy straps will get used often.
$15.00
These two black plates fit nice and snug between the chainstays of the newly redesigned Disc Trucker (2020 and newer), allowing you to bolt on the kickstand of your choice without gravely injuring your frame. Our other silver-colored Kickstand Plates remain the best option for legacy Trucker frames, so please don’t use the old plates with the new bike or the new plates with the old bikes. Normally we don’t like to tell people how to use our stuff, but in this case we have to take… a stand. - Allows use of any kickstand while protecting chainstays from damage - Includes two plates to protect the top and bottom of the chainstays - Compatible with 2020 and newer Disc Trucker frames
$15.00
Surly Big Dummy Frame Stickers/Decals - For repair, repaint or whatever - Dry transfer style - Headbadge included
$40.00
The Surly Deck Pad is the ultimate in cargo bike derrière accessories. Sold individually, the Surly Deck Pads are designed to easily attach to the rear decks of our Big Easy, Big Dummy and Big Fat Dummy for a luxurious passenger riding experience. Simply put, they make riding on the back of our cargo bikes even nicer. Two Pads will cover the whole deck, so there, now you know. You could probably even convince your ride-along friends or children to chip in and help pay for them. After all, nobody rides for free. - The Deck Pad mounts to the Dummy Deck to provide a soft platform for passengers large and small - Sold each - Also available as part of the Corral Kit - Individual Deck Pads measure approximately: 13”x8”x2”
$20.00
Further personalize your unique Surly bike with one of four Surly Make It Your Own Decal Sets, featuring alternative fonts and designs for the discerning rider. Stickers may also be affixed to helmets, mini fridges, dog food bowls, and more. - Decals are available in black or white - Each set includes decals for the down tube, chainstays, and fork blades, a Surly Make It -your Own seat tube icon, Surly headbadge, and a ’Natch frame sticker - Dry-transfer style
$35.00
Frame Protection Protect your bike against body snatchers, the blob, and those troublesome triffids. Specifically designed to protect your bike's exposed areas against knocks and wear, commonly picked up on the trails and in transit, the seventeen patches can be used independently or in harmony, letting you decide what areas to protect.
$40.00
No graphics. No logos. Just a clean layer of protection, available in matte or gloss. Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.
$29.99
The Ursus EASY MASTER RT92 Adjustable rear-mount kickstand (w/ oval chainstay mount) is an alloy kickstand with the capacity to hold up to 55 lbs. URSUS EASY MASTER STAY RT92 comes with a mount that fits around an oval chainstay. It is ideal for bicycles that are not designed for center-mount kickstands and feature an oval chainstay. The adjustable tool-free kickstand features a button that allows you to set the perfect length for your bike.  Features a tool-free adjustment button that lets you adjust the lean angle of your bicycle to your preference. The plastic foot attached to the kickstand is extremely strong and prevents the stand from slipping while in use. Weighs 350 grams.
$8.99 - $14.99
Ride with minimal chain slap by using a Chainstay Protector. Comes in 5 sizes and 4 colors giving you the versatility needed no matter what you ride. Designed and made in our Utah facility, the Chainstay Protector is made with neoprene and sewn with a tight stitch and heavy-duty thread for extra strength and durability. Lizard Skins chainstay guards are the original, strongest and lightest protectors on the market since 1993.