Replacement helmet pads for Lazer Compact Helmet
Replacement Visor for Lazer X3M and 2X3M Helmets
The Jandd Helmet Cover offers protection from the elements. - 3M Reflective Tape is sewn to the front and back, additionally the back has a loop for a high-visibility flashing light - Made with 200 Nylon Oxford with a laminated urethane layer, heat sealed seams and sew holes - Fits most bike helmets and keeps water from penetrating - NOTE: One size does not fit all, this cover is intended for standard helmets without a visor
When chilly, soggy weather rolls through, Garneau's H2 Helmet Cover keeps you both warm and dry. It's made from a polyurethane-coated spandex that's water resistant. The sealed seams and a snug stretch band that fits easily over your helmet also keep water from seeping in. Plus, when the sun's not shining, the high-visibility yellow color and reflective accents will help make you visible to others.
Replacement pads for Kask's Protone helmet.
- Protextura Plus fabric for water-proof protection while maintaining high breathability - Designed to fit most helmets - Reflective trim and bright yellow color enhances visibility in low light or foggy conditions - Drawcord in the hem helps fit a wide variety of helmet shapes
Replacement Pads for Lazer's Max+ Kids helmet
Replacement Pads for Lazer's Nut'z Helmet
Water-resistant stretchable cover that can be pulled on as the elements demand its use. - Waterproof shell - Fits over helmet - Reflective accents for visibility
Replacement visor for Kask's Bambino Pro TT helmet.
Replacement pads for Kask's Mojito helmet.
This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.
Say "buzz off" to bugs with Lazer's Genesis Insectmesh Padset. The mesh insect padding replaces the original Genesis helmet padding and covers the ventilation holes so insects cannot reach your head. This keeps insects out of the helmets for a stress-free ride.
Replacement visor for Lazer Compact/Tempo helmets
Replacement visor for post-2010 Lazer Topaz Helmets
Lazer's Winter Padset keeps your head warm on chilly rides so cycling doesn’t have to stop when winter season starts. These helmet-specific pads replace the standard padding with an insulated liner that wraps around your head and covers your ears for a beanie-like fit. Lazer keeps you going all year round. - Fits Lazer's Helium Helmet only
The Aeroshell is a plastic cover designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the rider's head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine—the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. - Fits Lazer's Helium helmet only
Say "buzz off" to bugs with Lazer's Nirvana/Sphere Insectmesh Padset. The mesh insect padding replaces the original Nirvana/Sphere helmet padding and covers the ventilation holes so insects cannot reach your head. This keeps insects out of the helmets for a stress-free ride.
Lazer's Winter Padset keeps your head warm on chilly rides so cycling doesn’t have to stop when winter season starts. These helmet-specific pads replace the standard padding with an insulated liner that wraps around your head and covers your ears for a beanie-like fit. Lazer keeps you going all year round. - Fits Lazer's Nirvana/Sphere Helmets only
Replacement visor for Lazer's Magma Helmet
Replacement visor for Lazer's Oasiz Helmet
- Fits small and medium Helium and other Rollsys equipped helmets - Designed for Helium Helmet, but also offers a "B" fit for other Lazer Rollsys helmets - X-Static pads are an anti-microbial, self-cleaning pad system
Replacement pads for Lazer's Tardiz helmets - X-Static pads are an anti-microbial, self-cleaning pad system
Replacement visor for Lazer's Vandal Helmet
The Lazer Inclination Sensor is the ultimate training tool to make you faster. It will keep you in your most aerodynamic position so you can cheat the wind and be as fast as you can be. It's like having a personal trainer in your helmet, encouraging you to keep performing at your top level. By delivering you real time feedback, it alerts you when you deviate from your optimal position and helps you find that sweet spot again. The Lazer Inclination Sensor is a simple and easy-to-use tool that will turn you into a faster rider. - Integrates seamlessly into 2016 and later WASP Air models - Easy set up via computer controls notifications, movement range - Contains: sensor unit, mount plate, charge cable, manual and Velcro attachments - Rechargeable battery is included in the sensor unit WHY? Amateur riders, weekend warriors, seasoned professionals…everybody is affected by fatigue during a ride, and the change in body posture it brings along with it. During a time trial or triathlon bike leg, this results is a less aerodynamic position on the bike and thus a slower ride. But how do you notice this change in body posture? Well, you couldn't up to now. But that has all changed with the arrival of the Lazer Inclination Sensor. WHAT? The Lazer Inclination Sensor is a body posture monitor that allows you to track your aerodynamic cycling posture in real time. The monitor tracks your head and helmet position and provides you with tactile or acoustic feedback when you are out of your optimal aerodynamic position. Before using the monitor it should be calibrated towards your optimal aerodynamic cycling position. For the best result, the calibration should take place in a wind tunnel with the help of aerodynamic experts. But it works just as well when you visit a training center or shop with experienced professionals to help you find that ideal aero position. The monitor aims at making you aware of your head position while riding, and guiding you towards that sweet spot where you cheat the wind as best as possible.
Looking for a great around town lighting system at a very reasonable price? The Duplex is just that. Providing both headlight and rear light in one unit, the Duplex easily mounts to your helmet with an included rubber strap and provides up to 100 hours of run time on only two AAA batteries. The light is easy to operate and can be switched between constant beam and flashing modes simply by pressing and holding a button. Making yourself visible in city traffic can help motorists see you better, and a good helmet-mounted light that is worn on your head, up and away from the distraction of car lights, can really make you stand out in a sea of vehicles. Use your head, and use a light. Features - Dimensions: 70.5 x 28.5 x 23 mm - Weight: 51.5 g (with bracket and batteries) - Light source: White LED x1, Red LED x1 - Battery: AAA alkaline battery x2 - Mount: Rubber band (Long) Modes/Run Time - (Front) Constant mode (15 lumens): 100hrs - (Rear) Constant mode (10 lumens): 100hrs - (Front) Flashing mode (30 lumens): 100hrs - (Rear) Flashing mode (10 lumens): 100hrs
PWR Helmet/GoPro Mount - for holding charger and modular lights on top of helmet (Excludes PWR Mountain). Tri-prong system works with GoPro, so can be used to mount lights under Garmin and other mounts. - Compatibility: Works with PWR Charge and Modular lights (not PWR Mountain) - Mounting system: Designed to fit most vented helmets, common for road and trail cycling and is GoPro compatible - T Slot (For modular): Allows for quick release of the light when parking your bike - Weight: 20g
No two heads are exactly the same. Give your Nutcase Metroride helmet an exact custom fit with removable and versatile foam pads in three different sizing sets. Comes in 3mm, 6mm and 9mm thicknesses.
To protect against bright sunlight and light rain, the Nutcase removable visor shades, shields and protects. Made from soft flexible rubber with a hard rubber fin that fits between the ABS plastic outer shell and EPS foam liner, the visor is perfect for unpredictable weather and sunny days alike. Visors are compatible with Street and Little Nutty helmets only, and will not fit with Metroride, Baby Nutty, Moto, Snow, or Water.
Lose your kid's Baby Nutty Helmet pads? Or did they just get a little too much loving? Replacement pad sets for your Baby Nutty helmet. Each set comes with two of: - 3mm pads (front and rear) - 6mm pads (front and rear) - 6mm crown pad
Page 1 of 2 Next page