Other

These reducers allow the use of handlebars with 31.8mm clamp diameter in our Barkeeper stem (which is normally designed for 35mm handlebars). - 19g /pair - Barkeeper stem purchased seperately ATTENTION: The sleeves were specifically designed for the BikeYoke Barkeeper stem. Other stems were not checked for compatibilty.

Includes all hydraulic seals to perform a complete cartridge rebuild of your BikeYoke dropper post. Compatible with: DIVINE

Includes all hydraulic seals to perform a complete cartridge rebuild of your BikeYoke dropper post. Compatible with: DIVINE SL and DIVINE SL RASCAL

Service kit for 100 hour service (readjusting play and replacing wiper). Kit includes: - 1x Wiper - 6x Glide pin - 1x Lower bushing - 1x Foam ring - 1x C-clip - 1x Upper bushing

Includes all hydraulic seals to perform a complete cartridge rebuild of your BikeYoke dropper post. Compatible with: REVIVE / REVIVE 2.0

Service kit for 100 hr service (re-adjusting play and replacing wiper). This Service Kit 1 only fits posts that have: "Wiper without spring" There are three different service kits for the REVIVE/DIVINE 30.9/31.6, depending on model year and version. To determine the correct service kit for your post, please copy this link into your web browser: https://www.bikeyoke.de/media/products/REVIVE%20service%20kit%20coding.pdf Kit includes: - 1x Wiper (no spring) - 6x Glide pin - 1x Lower bushing (grey, without line marking) - 1x Foam ring - 1x C-clip R12

Service kit for 100 hr service (re-adjusting play and replacing wiper). There are three different service kits for the REVIVE/DIVINE 30.9/31.6, depending on model year and version. To determine the correct service kit for your post, please copy this link into your web browser: Kit includes: - 1x Wiper (with spring) - 6x Glide pin - 1x Lower bushing (grey, without line marking) - 1x Foam ring - 1x C-clip R12

With our Yokes, we offer a clever solution that allows you to replace your Specialized rear shock with a regular standard sized shock. Yokes are CNC-machined from a single piece of 6061-T6 aluminum and anodized in a stylish black finish. Converting the Yoke is fairly easy, as all the necessary parts are included in the scope of delivery or can be taken directly from the bike. Fits: Epic 2021-2024 models Includes: 1x BikeYoke EP03 1x DU bushing 1x reducer 1x stainless steel bolt Matching shock dimensions: - 210x52.5 - 210x50 (note: rear travel will be reduced by approximately 5mm)

This BikeYoke allows the use of a standard shock in your Specialized bike. Camber 2016-2018 Includes: - 1x BikeYoke CB01 - 1x DU bushing - 1x reducer - 1x stainless steel bolt

This BikeYoke allows the use of a standard shock in your Specialized bike. SX Trail 2009-2012 Includes: - 1x BikeYoke SX01 - 1x DU bushing - 1x reducer - 2x custom stainless steel bolts yoke/rockarm - 1x stainless steel bolt

These super tough axles are constructed to Fox's exact specifications and made from 7075 Aluminium. Unlike any other fork axles on the market, these feature a unique double hex design. This includes the traditional 6mm that everyone is familiar with but with an added 8mm Allen key fitting as well. This feature makes removal much easier if the 6mm gets chewed up, over tightened or not removed for a long time. Having an Allen key fitting instead of a QR also allows the use of a torque wrench so you can be sure your wheel is correctly tightened. This Axle also comes with a grade 5 titanium pinch bolt and backing nut to finish things off. Clean, simple, and fast! Replacement for Fox PN: 820-09-071-KIT / Service Set: 2021 36-38 15x110 KaboltX Pinch-axle Assembly 820-09-063-KIT / Service Set: 2020 FOX-Marzocchi 15x110 QR Adjust Axle Assembly NOTE: This axle does not fit 2021+ 32 and 34. (Square Arch)

For years the Offset Shock Hardware has been used covertly on the World Cup circuit by many of the top riders. This Offset Shock Hardware allows the head angle to be easily manipulated simply by shortening or lengthening the effective eye to eye of the shock. This allows you to slacken the head angle and drop the bottom bracket and improve the handling of the bike.

Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. They feature "a get out of jail" 6mm Allen key on the drive side of the axle if you manage to round the non-drive side. - Constructed from 7075 Aluminium and made to the manufacturer's exact specifications. Fits Yeti Bikes: - 160E - Arc - SB120 - SB140 MY23+ - SB160 Note: Original part for SB120, SB140 MY23+, SB160 is 172mm length, the 174mm axle is still compatible.

An effortlessly subtle and minimal design that keeps your seat post secure and adds the last splash of colour to your build. No edge left unsmoothed, and no detail overlooked. Even the split in the back has been machined wide enough so there’s no need to detach your dropper cable, which makes installation a breeze. A stainless-steel bolt gives reliable clamping power and ensures no rust even in the grimmest conditions. - Stainless Steel Hardware - 6061-T6 Aluminium - Weight: 22g

When you’ve got to finish your bike off right. The Burgtec Top Cap, Top Cap Bolt and Stem Spacers are the perfect finishing kit. Mix and Match to suit your bike. ***Top Cap only works with Burgtec Top Cap Bolt***

NOTE: The crank spindle length, must be long enough to allow for proper crank arm installation. - This BB includes x2, DRF3041 bearings, plus the necessary spacers and washers - Adapts cranksets with 30mm spindle, to fit BB86/BB92 frames (with 41mm ID press-fit BB shell) - Bearing OD is stepped (a 44mm lip interfaces with BB shell face) - Double row deep groove radial, with 440C Stainless Steel balls and races (ABEC-3 precision) - Provides maximum corrosion resistance in applications and environments where critical - Filled with Marine High Pressure grease - 80g

Fits all Road or Mountain bikes with BB90 or BB95 shell - Includes two bearings and two seals - Compatible with 24mm spindle cranks - Grade 10 steel balls; ABEC-3 precision - 50g

5mm Hose Including 90 & Straight Connectors Fits most manufacturers disc brakes

We set out to make the toughest, most precisely machined, most adjustable dropper trigger on the market. After numerous prototypes and over a year of testing, we’re proud to present a dropper trigger with stacked dual sealed cartridge bearings, two different cable clamp options, a barrel adjuster, and a hinged clamp. Machined by us right here in Chico California to the highest tolerances. - 6061 Aluminum - 22.2mm Clamp Diameter - 40g

Mounted in place of a front derailleur, the Chain Keeper works with single and 1x multispeed drivetrains using a narrow chain. The chain block surrounds the chain as it meets the chainring and prevents it from skipping off. Designed with adjustability in mind, the Chain Keeper can accommodate a range of chain line measurements and chainring sizes. - AL6061, black ano - Portion of seat tube where the clamp mounts must have a circular profile - For frames with tapered seat tubes, the Chain Keeper Extension can be used to raise the clamp to a higher section of tubing with a straight circular profile - 69g *** For more detailed information, please see the Chain Keeper Fit Guide at: http://paulcomp.com/chain-keeper-guide

CNC machined 6061 aluminum Black anodized finish Thru Axle Thread Pitch M12x1.75 Santa Cruz: 04-16871, 23-15651 Includes DO nut 23-16458 Juliana Quincy 1 - 2022+ Santa Cruz Stigmata 2 - 2015-2019 Stigmata 3 - 2019-2023

CNC machined 6061 aluminum Black anodized finish Attaches to frame with M8x18mm Socket Head Bolt Kona: CC-142 This hanger has M12x1.75 axle threads Kona Big Honzo ST - 2019-2020 Big Unit - 2014-2016 Explosif - 2013-2018 Honzo - 2013-2015 Honzo DL - 2021-2022 Honzo ESD - 2021 Honzo ST - 2016-2022 Honzo Ti - 2016-2018 Private Jake - 2016-2017 Raijin - 2014 Remote - 2018-2022 Shonky - 2016-2022 Shonky ST - 2021 Unit - 2020-2022 Unit X - 2020-2022 Woo - 2020-2022 Wozo - 2017-2020

CNC machined 6061 aluminum Black anodized finish Attaches to frame with (1) M4x10mm Flat Head Screw Rocky Mountain: Hanger 6, 1098057ANJ Bulls Black Adder - 2008-2014 Go Outdoors Calibre Beastnut - 2017 Marin Eldridge Grade - 2022 Eldridge Grade 1 - 2022 Polygon 20-C - 2012-2013 20-C S - 2012-2013 20-C Team - 2012-2013 Cleo - 2013-2014 Cleo 2 - 2021 Cozmic - 2011-2016 Premier 4 - 2018-2021 Premier 5 - 2018-2021 Siskiu D5 - 2019-2022 Siskiu D6 - 2016 Siskiu D7 - 2016 Tensor TR1 - 2017 Xtrada - 2014, 2018 Rock Machine Catherine E60 - 2018-2020 Crossride 100 - 2019-2020 Crossride 250 - 2019-2020 Whyte 29-C - 2012-2015 29-C Team - 2013-2018

CNC machined 6061 aluminum Black anodized finish Thru Axle Thread M12x1.0 Use without the B-Link when attaching Adds direct mount compatibility with Shimano mountain deraileurs to any SRAM UDH compatible frame. Optimized for Shimano Saint (RD-M820), Deore (RD-M610, RD-M5120, RD-M4120), Deore XT (RD-M8000, RD-M8050), SLX (RD-M7000-10, RD-M670), and Altus (RD-M2000). Retains ability of original SRAM UDH to rotate under impact to help protect the derailleur in the event of an impact.

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

- Aheadset preload adjusting bolt

Replacement small parts for Hope disc brake Hope disc brake calipers.

Hope Brake Lever Parts

Service parts for Fox suspension.