Parts & Accessories

Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs

Shimano's SM-SH56 Multi-Release Cleats disengage with less effort and in more directions than standard SPD cleats. - Not compatible with Shimano PD-M858 (XTR) SPD pedals

- Engineering-grade thermoplastic construction - SPD-SL compatible interface - Cleat Type: SPD-SL

- Developed for the TIME XPRO & XPRESSO road bike pedal range. - They allow angular and lateral freedom in order to respect the natural movements of your legs and joints. - You can also adjust the Q-factor (by switching the cleats) - The Bi-material brings more durability when walking with the cleats. - These cleats are the stock cleats included with all XPRO & XPRESSO pedals.

- Strapless design is easy to engage without fully committing to the pedal - No special shoes required - Improves pedaling efficiency - Molded from unbreakable nylon - Please make sure your pedals have visible mounting points or a removable reflector for mounting prior to purchase - Includes mounting hardware. Note: metal plate may not be required during installation.

Problem Solvers Deckster pedal adapters. Converts SPD-compatible pedals to platform pedals for casual cruising. - Works with 2-bolt, SPD-style cleats, such as Time, Shimano, Crank Brothers, Wellgo and others. Not compatible with Speedplay - Cleats not included - 85 x 95 x 10mm platform - Hardware included, cleats not included

- Set of 44 total replacement steel pins for vault pedals - Run threads-out for maximum traction or flip the pins to heads-out for less grip - 16 Short pins (for use in the center) overall length 8.5mm, stud is 4.5mm - 28 Long pins (for use in the outside edge) overall length 12.5mm, stud is 4.5mm - Use either a 5mm spanner or the included 2mm hex wrench to secure/remove

Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Mallet E - Model years 2016 – present

Everything you need to fully rebuild your OneUp Aluminum Pedals. Our V2 kit is compatible with all OneUp Aluminum pedals. The brass bushings take the place of the 3 small cartridge bearings and aluminum washer that were on our original pedal assembly. KIT CONTAINS - 2 LARGE OUTER BEARINGS - 2 BRASS BUSHINGS - 2 OUTER SEALS - 2 FLANGE WASHERS - LH AND RH AXLE BOLTS - 2 AXLE O-RINGS - LH AND RH BEARING NUTS

The Activ Grip Trail Pads are compatible with our Trail Grip platform pedals. Built from extremely strong and durable material and designed in collaboration with outdoor specialist Vibram, they offer exceptional traction on the toughest rides. Their concave geometry is enhanced with large rubber lugs and composite studs for optimal foot stability and extreme durability to take on the challenges of any terrain.

Bring power to every ride, on- or off-road. If you already own a compatible Garmin pedal-based power meter (Rally RS, Rally RK or Vector™ 3), use this conversion kit to easily swap your power sensor to new pedal bodies for use on another bike. This kit contains all the components you need to make the switch.

The KEO GRIP cleats closely resemble the KEO CLEAT model, yet they boast the added feature of a TPU layer on the shoe side which prevents the risk of cleats sliding on carbon soles. Their anti-slip surface on the pedal side offers extra safety and stability when walking. - Use: Road - Material: Polyamide + TPU - Lateral adjustment: 4mm - Longitudinal adjustment: 9mm - Weight (pair + fasteners): 68g

- Works with all RXS and Impact pedals. - Five degrees of heel float and 2.5mm of lateral float along the pedal axle. - Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.

Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Look Keo System - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 45 grams/pair

- Super-strong foot retention pedal strap system - Large Velcro and durable polyester top cover - Anti-Slip tension design - Fits most platform pedals - Will not fit standard cage pedals

VP's Split Cleats boast super-smooth and easy entry/exit into your clipless pedals, excellent durability and maximum power transfer. They're made of a tough and light composite material, are compatible with VP and Look Keo pedals (pedals sold separately) and even have areas that grip for walking traction. That's all great, but what really sets the Split Cleats apart is how easily and accurately they can be replaced when they wear out. The cleats split in half so that you simply remove each half and use the half still on the shoe to ensure perfect cleat placement every time! With these cleats you'll never have to fuss around trying to get your new cleats in the right place again and it only takes a minute or two to replace cleats, too. Genius! The Split Cleats are available in 2 models, one with 7 degrees of lateral float for your feet and one that's fixed (no float). - Fits VP and Look Keo pedals (pedals sold separately)

- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit. - Includes 36 steel pins and 2mm spacers to replace both sides of two pedals - The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.

Replace worn-out spindles or customize your stance width, with these kits for iSSi Road pedals. - Chromoly spindles - Sealed cartridge bearing and bushing in an alloy cartridge - Compatible only with iSSi Road pedals - Installs with iSSi Road spindle tool (TL5499) - Pedal Spindle: 9/16" - Spindle Material: Chromoly Steel

X-TRACK cleats are compatible with all SPD-standard pedals, utilizing 2-screw mounting for an ultra compact profile and lightweight. X-TRACK Easy cleats provide a 13° angle of disengagement and allow for multidirectional release. - Compatibility: X-Track and Geo Trekking Collection, SPD compatible - Material: Premium Steel - Clip out direction: Multidirectional - Clip in: 30% easier - Angle of Disengagement: 13° - Lateral Adjustment: 2mm - Angular Adjustment: 1° - Weight (pair): 45g

RaceFace Chester Pedal Rebuild Kit

- Chrome plated steel clips for double toe strap - Hardware included - Deep size for shoes with a larger toe-box

Xpedo XPR cleat set for R-FORCE 6 is an SPD style cleat specifically designed for 3-hole road shoes. - Weight: 135g per set with hardware - Float: 6°

Cleat screws are intended for proper installation of the Cleat Wedge. Designed to withstand high torque levels, creating a secure and reliable connection between the rider and the bike. Available in different lengths and styles to fit most pedal systems. - 10mm SPD/MTB compatible cleat screws - 4mm Hex countersunk M5x0.8 - Compatible with most 2-hole cleats - Black oxide-coated carbon steel - 25 pieces

Origin-8's Look Delta Cleats are compatible with Look Keo-style pedals. They feature 9-degrees of float. - These cleats use the Look/SPD-SL bolt pattern.

Dimension Toe Clips and Straps Set. Includes: - 4 bolts - 4 nuts (washers included) - 2 nylon toe straps - 2 toe clips

- Shimano SPD-SL-style - Engineered thermoplastic injection body - Weight of 24 grams per cleat - 4.5-degree floating arc

Crank Brothers' 5050 Pin Kit includes 40 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.

Cleats with a more forgiving 10-deg release. - Optimized for novice riders or those new to clip-in pedals - 10-deg release angle makes it easier to unclip - 2-hole bolt pattern for mountain bike shoes - Plastic spacing shims included - Compatible with all Crankbrothers clip-in pedals

Origin-8's Pro Grip II Toe Straps feature a super-strong double-hold strap system and a large Velcro polyester strap cover. They fit most BMX platform style pedals.

- Nylon clips - Woven straps - For ATB or hybrid use

- Real leather material - Classic design fits most caged pedals

- Steel - Quality leather straps included

Keep your feet on the pedals and mash happy. Straps are the perfect intro to foot retention for those that aren't ready to go full-clipless yet. Get more out of your pedal strokes, stay strapped. These Pure Pro footstraps are made out of ballistic nylon and military-grade parts. The best quality on the market, these straps will assist in your perfect pedal stroke along with helping you skid to a stop in fixed gear. Comes with left and right straps, but pedals aren't included!

Traditionally, mountain cleats have only had two material options. Mild steel and brass. This has largely been to ensure that the cleat wore out faster than the pedal interface, but has left us with cleats that are often times very fast wearing, and in all cases, are quite heavy. Enter 6/4 Titanium, only slightly less hard than tool or spring steel used in the pedals, it's a remarkable 2.25 times stronger and 3 times tougher than brass or mild steel. Best of all, the extreme toughness and abrasion resistance of 6Al/4V titanium means that you can expect 300-400% wear life compared to traditional materials. Now we couldn't just stop there, but by combining 3D printing technology with this material that is 1/3 lighter than steel, we are able to achieve a cleat with internal lattice structure (called a gyroid) which maintains stiffness and strength while reducing weight to create a cleat set that is HALF the weight of a standard cleat set. This savings of 25-30 grams per set of cleats is significant over time, particularly in CX events where running is crucial. 25gm reduction x 100 rpm = 180kg of mass not lifted per hour of riding, 90kg per leg!

- Allows a customer to replace their cleats. - Two replacement cleats in box

Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees

- Steel toe clips with 2 gates designed for single toe straps - Sold in pairs

Origin-8's Double Steel Toe Clips feature the classic toe clip look and style, with double strap compatibility. And, they are built to the same standards held for Japanese Keirin racing.

The Cleat Screw Kit is a bike fitter's best friend because it eliminates the difficulty (and in some cases impossibility) of finding the perfect type and length of cleat screw. - The Kit contains 150 screws (15 different screw types/sizes with a quantity of 10 each) - SPD / MTB Compatible Cleat Screws - 4mm Hex countersunk M5x0.8, compatible with most 2-hole cleats, and are black oxide coated carbon steel. Kit includes 10 of each: 10mm (PD0219), 12mm (PD1576), 14mm (PD1577), and 16mm (PD1578). - Look / Shimano Compatible Cleat Screws - 4mm Hex Button Head M5x0.8, are compatible with most 3-hole cleats, and made from stainless steel with Nylock®. Kit includes 10 of each: 8mm (PD1579), 10mm (PD1580), 12mm (PD1581), 14mm (PD1582), 16mm (PD1583), 18mm (PD1584), and 20mm (PD1585). - Speedplay Walkable Compatible Cleat Screws - Phillips Recessed Button Head - M4x0.7, are 4-hole cleat compatible and made from stainless steel with Nylock®. Kit includes 10 of each: 9mm (PD1590), 11mm (PD1591), 13mm (PD1592), and 15mm (PD1593).

Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Exustar cleat C01, C03, and C05 - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 14 grams/pair

- Cleats to fit Ritchey Echelon and Look Keo clipless pedals - Includes a pair of cleats and hardware

Reliable and Durable 2-Bolt Cleat Small details make a big difference—especially when it comes to mountain biking. Worn-out cleats can lead to poor pedal function including premature or stubborn release. But swap on a new set of Shimano SM-SH51 Cleats and you know they're purpose-built to work seamlessly with nearly all Shimano SPD Pedals, delivering long-lasting performance thanks to their heat treated forged steel construction that will stand up to even the harshest riding conditions. Features: - Shimano SM-SH51 SPD Cleats come stock with all Shimano SPD pedals and are the go-to choice for mountain bikers, indoor cyclists, and anyone looking for a durable and reliable 2-bolt cleat. - Customizable: Engineered specifically to work with nearly all Shimano SPD pedals, which allow you to micro-adjust the spring force required to clip in and out of your pedals - Secure Engagement: Deliver 4 degrees of float, which assures just the right amount of movement while also providing a secure connection to your bike - Ease of Disengagement: Feature a 13-degree clip-out angle, allowing you to quickly get out of your pedals when the need arises - Built to Last: Made from heat treated forged steel that delivers durable long-lasting performance even under the most severe riding conditions PREDICTABLE ENGAGEMENT With 4 degrees of float, Shimano SM-SH51 Cleats permit just the right amount of movement for critical on-the-fly weight shifts while still delivering the secure cleat-pedal engagement needed to confidently tackle technical terrain. USER FRIENDLY Shimano SM-SH51 Cleats are compatible with nearly all Shimano SPD pedals, which allow you to micro-adjust how hard or easy it is to clip in and out, providing an unmatched level of customization. These cleats also feature a 13-degree clip-out angle, meaning with the simple outward twist of your heel you can quickly get out of your pedals when the need arises.

Giant's AC Toe Clips and Straps includes two durable chrome-plated steel clips, mounting hardware and a pair of quality leather straps with chrome-plated steel buckles.

Longer rear load pins for the outer extremities of your pedals provide ultimate durability, while shorter front load center pins create a virtual concavity in the pin pattern, increasing grip without sacrificing pedal body thinness. - 28pcs rear load pins - 16pcs front load pins - Tool included

The Keo Spacer adaptors are slim wedges that fit between the shoe and the cleat. They aim to avoid the unpleasant creaking sound provoked by contact between the sole and the cleat, which can arise in particular with flat-soled shoes. Delivered with 2 spacers and 6 screws for quick and easy installation.

- Specifically designed for boots and larger shoes - Steel toe clips with 4 gates designed for double toe straps - Sold in pairs

Kit Includes premium components: - Inner cartridge bearing x 2 - Outer cartridge bearing x 2 - Igus solid bearing x 2 - Inner seal x 2 - Bearing locknut x 2 - Spindle screw (Left) x 1 - Spindle screw (Right) x 1

- NJS/Keirin certified chrome plated steel clips for single toe strap - Hardware included

The Blade Kit for the Keo Blade Carbon range is compatible with ceramic and Ti models. It allows you to replace the original blade or change the tension of your pedals to fit your requirements. 3 different tensions are available: 12 for standard use, 16 for sprinters and a recommended 20 for track cycling.

- Tubular stainless steel cage clips for single toe strap

- Look, Kéo 2 Max, Blades

Origin-8's SPD Cleats are compatible with Shimano SPD-style pedals. These cleats are single release.

The Cleat Shim-Spacer helps compensate for leg length discrepancies.

- The ATAC 13/17° cleat works with all TIME mountain pedals. - Included with all mountain pedal models numbered "6" and higher - Release angles of 13 degrees or 17 degrees depending on how the cleat is set up on the shoe - Compatible with all two-hole cycling shoes.

- Extends pedals - Not for use on exercise bikes

- Custom pedal adaptor set - Allows foot to be fastened to any pedal front and rear - Great for lost mobility or handicap applications - Allows for up to size 13 shoe - Includes plates, hardware, and front/rear strap system

- SPD compatible - Single release - Hardware included

IGUS Bushing replacements for your Spike or Oozy pedals help to eliminate any play that develops over time, and revive smooth spinning action. - 2pcs IGUS self lubricating bushing - 2pcs O-ring - 2pcs stainless shim washer

Origin-8's Leather Toe Clip Straps are made from real, high-quality leather and feature the classic, double strap design.

The DELTA standard requires a rotational movement of the foot toward the outside or inside for disengagement. This function improves cyclist's safety; no body or bearing prevents disengagement toward the inside. Compatible with non-KEO LOOK pedals, their contact area is wide for optimal comfort. They also feature a memory positioner to aid when changing cleats. - Use: Road & Indoor Bike - Material: Polyacetal + PTFE - Lateral adjustment: 4mm - Longitudinal adjustment: 12mm - Weight (pair + fasteners): 75g