The ForkLift is one of Yakima's most versatile fork-mounted roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It also features quick and easy tool-free installation, a sleek design and a smooth, automotive finish that looks great on any car. The easy-to-adjust sliding wheel tray makes positioning the rear wheel a snap and it’s compatible with most disc brakes.
You won't be able to keep quiet about how easily Thule's Big Mouth Bike Mount carries your bicycle. Its self-adjusting soft jaws clamp the down tube on your bicycle (up to 3 3/8-inches in diameter), and the wheel straps fit tires up to 2.6-inches wide. This mount quickly attaches to your roof-rack crossbars (sold separately), features easy-to-reach adjustments, and is lockable with an optional key lock.
With an iron grip, Thule's Rapid Crossroad turns factory-installed raised rails into a versatile multipurpose rack system. Your car's rails are fully protected thanks to the integrated rubber lining. You also get maximum rack strength and a custom fit from the tooless, rubber-coated steel straps.
Yakima's caged beast offers monstrous carrying capacity. The MegaWarrior is a perfect fit for mid- to full-size sport-utility vehicles and it's made of heavy-duty steel. You can easily attach bike mounts directly with its movable accessory bar and a custom fairing is included to cut wind noise and protect your cargo. The MegaWarrior's universal mounting hardware fits round and square crossbars, plus many factory racks, too.
Thule's ThruRide roof-mounted bike carrier makes it easy to mount almost any bike with a thru-axle fork—no adapters needed. The ThruRide fits forks with 12-20mm thru-axles on anything from fat bikes to XC race rockets to downhill rigs. To load your bike, simply remove the front wheel and re-install the thru-axle into the fork. Lift the bike into the rack, and close the convenient one-handed clamp down on the axle. Then, dial down the clamping pressure to give your bike a secure ride. The ThruRide also works with traditional 9mm quick release forks using an adapter (535SKR sold separately). The rear of the rack is crafted from Thule's aerodynamic "D" shaped low-profile tray. And, tool-free universal mounting makes the ThruRide easy to install on Thule rack systems, as well as round bars and most factory racks.
- Durable construction for long lasting use - Made from water resistant nylon to help keep contents dry - Easy to attach to roof racks or raised side rails - Fits SportRack Roof Rack Systems, side rails, square, round and most factory racks Medium - 13 cubic feet of cargo 35"(l) x 35"(w) x 18"(h) Large - 15 cubic feet of cargo 37"(l) x 37"(w) x 18" (h)
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
Thule's AeroBlade Edge is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles with a factory roof rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The feet fit your vehicle's roof rails without a fit kit and they're T-track compatible as well.
Thule's Load Bars are a rock solid rack solution that come in 4 different widths to fit a huge range of vehicles.
Loading your boat has never been easier than this! Two front and two rear saddles with integrated rollers will have you and your friends on the water in no time. The spring-loaded base automatically adjusts to boat when loading. - Mounts to any bar type without tools, making installation a cinch. easy loading Fully assembled out of the box - Tool-free installation Fits Yakima round, square, factory and aerodynamic bars Spring-loaded base automatically adjusts to boat when loading - Smooth molded pad hugs and protects multiple boat types - Tilting paddle technology to accommodate an array of boats and roof rack systems - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs - SKS Locks sold separately - Supports one boat up to 80 lbs Minimum crossbar spreads of 24 or more
Go BigStack to go big! Mount up to 4 boats on your roof, or use that room for other gear for a multi-sport adventure. HullGuard padding keeps your boats safe and universal mounts fit nearly any shape crossbar. - Folds when not in use for better aerodynamics - Tool-free installation Fits Yakima round, square, factory, and aerodynamic bars - Top-of-the-line Hullguard padding keeps your boat protected during transport - SteelCore construction uses a steel tube frame for superior strength - Integrated ramp system makes it painless to load your boat - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs Integrated bottle opener - SKS Locks sold separately - Minimum crossbar spreads of 24 inches or more
Got a Texas-sized SUV equipped with Yakima's LoadWarrior rooftop carrier? Then you may need Yakima's LoadWarrior Extension. It's constructed of heavy-duty, weather-resistant steel and it adds 18 inches and 40% more carrying capacity to Yakima's LoadWarrior rooftop basket (sold separately).
Versatile, adaptable, and super low-maintenance, the JayLow provides maximum loading and minimal fuss. Carry one boat in cradle position, or two boats in stacker position. Carry 1 boat in J-cradle position or 2 boats in vertical, stacker position - Fully assembled out of the box - Tool-free installation Fits Yakima round, square, factory, or aerodynamic bars - Adjust the upright position with the easy-to-use integrated cam lever - Folds flat when not in use - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs - SKS Locks sold separately - Supports one boat up to 80 lb or two boats with combined weight of 110 lbs or less - Minimum crossbar spreads of 24 inches or more
Traverse fitting kit required for perfect fit of the roof rack to a specific car. Compatible with Thule Traverse 480 and 480R Feet only.
The first load-assist mount to handle both SUPs and kayaks makes loading and unloading heavy boats and boards a breeze. The lightweight mount tilts down more than two feet from the roof rack, takes on up to 45% of the boat’s weight, then helps gently raise it up to the top of the vehicle. Once loaded, it securely cradles your boat or boards for the ride. At only 21 pounds, it’s super lightweight but built burly enough to wrangle an 80 pound load. Product details: - Easily load and unload kayaks and boards at waist level at the side of the vehicle with the easy to use slide and tilt mechanism - 80 lb. boat and board capacity easily handles a large kayak or two boards - Universal mounting hardware fits most roof racks - Lightweight materials and construction don’t eat up roof’s carrying capacity - Tilts down a lengthy 26" from roof rack height - Provides 30-45% weight assistance (depending on boat width) - Felt-covered cradles flex to conform to hull for secure transport - Folds down flat to reduce drag and noise when not in use - All tie-down straps included - Locks to base rack with SKS Lock Cores for added security (sold separately)
- Sold in pairs-combine them with rollers or saddles for a custom set-up - Flexible saddle shape conforms to boat hull for secure full contact cradling - Felt padded cradles protect hulls and are shaped for easy loading - Tool free install to any cross bar - Locks to base with SKS lock Cores for added security (sold separately) - Premium HeavyDuty strap and bow/stern tie down included - Capacity: 1 kayak 80lbs (when used with another pair of saddles or rollers)
Maximize your kayak carrying ability with The stacker. It can hold up to 4 kayaks stacked on their side taking up the least amount of roof space. - Fold-down steel design with non-scratch outer coating - Quick on/off hardware ensures fast installation and removal - Optimally sized carrier leaves roof space for other Thule accessories - Carries up to 4 kayaks and requires 1 to 2 people to load and unload them - Includes straps to transport 2 kayaks - 1 to 4 carriers per vehicle - Accommodates kayaks up to 36” wide and 75 lbs - Requires Thule rack systems crossbars, round bars or factory racks (sold separately) - Primary watercraft: Kayak
Let your friends enjoy the trip, because loading and unloading with the BoatLoader could not be easier. The telescoping load-assist arm lets you load your boat while protecting your vehicle and your boat, and retracts into your Yakima crossbar when not in use. - Telescoping boat load-assist arm retracts into your Yakima crossbar - Protects kayaks, canoes and your car from dings, scratches and dents - Corrosion-resistant - Fits Yakima round crossbars only - Extends 28 inches from end of bar
Getting your gear onto your rack isnt complete until youve secured it. This pair of super strong box-stitched 16 straps include soft, rubber-coated buckles to protect your boats and gear from scratches.
The KeelOver attaches directly to any roof rack for a quick, tool-free assembly, right out of the box. Not only will your canoe arrive to the water safely, but youll get to spend more time on the water, making for many happy paddlers. - Universal design attaches to round, square, aerodynamic and factory bars with a single tightening knob - Includes canoe securing straps and bow / stern tie-downs ensuring you have everything needed for a single canoe - Durable over-molded rubber cushions the canoe gunwale while providing stability - Simple, tool-fee installation and assembly within minutes of opening the box - Dual bolts included to ensure an integrated fit to vehicle - Rubber padding protects your crossbars from damage or corrosion
- Fits all Yakima crossbars except 86-inch - Sold in sets of 4
Step up to the completely new Yakima bar. Thoroughly wind tunnel tested, the black JetStream’s JetFlow design is exceptionally aerodynamic, incredibly strong, lightweight, and really quiet on the move. The root of a modern rack system, it carries a lot and looks good doing it. - Wind tunnel tested JetFlow™ teardrop shape is strong, quiet and exceptionally aerodynamic - Seamless extruded aluminum construction is light, strong and sleek - JetTruss™ internal support engineering adds serious strength - Materials and construction create a durable bar designed for years of use - T-slot with SmartFill™ push-down infill for easy mount attachment and efficient airflow - JetStream Black - powder-coated alloy finish and high-gloss polymer end caps - JetStream Silver - clear anodized alloy finish and high-gloss polymer end caps - Available in 3 sizes; SM (50”), MD (60”) and LG (70”)
Yakima's Universal Mighty Mounts are a simple way to install Yakima accessories on your car's factory racks. The universal design fits almost all factory crossbars.
This premium carrier basket combines exclusive design with high quality materials. Its multiple integrated and innovative functions are intuitive to use and provide an incredibly versatile platform for adventure.
Fitting kit required for perfect fit of the roof rack to a specific car.
RockyMounts' LiftOp is a slim, sleek roof-top solution for getting your skis and snowboards safely up to the slopes. Thick rubber padding grips your skis with a strong hold, so you'll have nothing to worry about when you're rushing up to the resort to catch first chair. And the easy-to-operate levers open the racks quickly. Plus, RockyMounts Lock Cores and keys are included with rack.
Thule's Traverse Short Roof Adapter enables installation of a rack system on 2-door cars or cars with short roofs. It increases the stability of your rack and gear which means you can safely carry more equipment. It's designed for use with the Traverse Foot System and Rapid Aero or square crossbars.
Thule's AeroBlade Edge (Flush Mount) is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles without a factory rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. These flush-mount feet will need a fit kit for your specific vehicle (sold separately).
With an iron grip, Thule's Complete Crossroad System turns factory-installed raised rails into a versatile multi-purpose rack system. Your car's rails are fully protected thanks to the integrated rubber lining. You get maximum rack strength and a custom fit from the easy-to-install, rubber-coated steel straps. This complete kit includes four Crossroad feet, four locks, and a pair of load bars.
Thule's XK3 Xsporter Rack Adapter makes your Toyota Tacoma compatible with Thule's revolutionary Xsporter truck bed rack system (sold separately).
Page 1 of 4 Next page