Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Quarq DZero Power Meter Spider for Specialized
$779.00
DZero is Quarq's next-generation power meter platform for those who live to be challenged, pushed, and tested in the toughest scenarios imaginable. Now Quarq has introduced a DZero spider designed to replace the factory spider on Specialized's S-Works carbon crankset. Quarq DZero for Specialized embodies 10 years of Quarq advances in power meter technology, plus new features such as dual Bluetooth low energy and ANT+ wireless data transfer, revised circuitry, a new strain gauge design and the Qalvin BLE app. You also get AxCad accelerometer cadence, the easy-to-replace CR2032 battery, an IPX7 waterproof rating and a 2-year warranty. Features & Benefits: - Bluetooth low energy technology and ANT+ wireless data transfer - AxCad – no cadence magnet required - 10K Temperature Compensation - Battery – CR2032, 200-hour battery life, change without tools - Power Balance - OmniCal – swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy – within 1.5%, measuring both legs - Free firmware upgrades with the Qalvin app Essential Details: - Traditional 5-arm spider compatible with Specialized S-Works Carbon Road Crank Arms from 2013-Current. - Available in 130 BCD and 110 BCD. - Replaces the standard spider. - A Specialized lockring tool is required for installation.
Origin8 Thruster 2x Chainring Bolt Set
$7.99 - $9.99
- Chainring bolt sets are available in sets of four or five - Bolts have 5mm hex heads - Material: Steel - Type: 2x
Sunlite Aluminum Crankarm (Left)
$13.99 - $15.99
• Square taper interface • Only includes left crank
Race Face CINCH Puller Cap with Washer 18mm XC/AM
$6.99
Race Face CINCH Crank Puller • Puller cap for Cinch model Race Face cranks only, including Next SL, SixC and Turbine • Puller cap utilizes 16mm hex key • 26mm thread
SRAM Carbon Crank Arm Boot
$11.00
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact.
Race Face 2008+ Next SL and 2012+ Atlas Crank Bolt/Puller
$9.90
Race Face crank bolt/puller for 2008 and newer Next SL cranks and 2012 and newer Atlas cranks.
Race Face Cinch Direct Mount Spider
$59.99
Race Face direct-mount chainring spider for Cinch ranksets.
Race Face Next SL G4 Crank Boots
$9.99
Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
Shimano XTR M900 Left Crank Arm
$208.00
Shimano XTR Left Crank Arms - Spindle Interface Type: Hollowtech II
Sugino Chainring Bolt Set
$19.00 - $29.90
- Chrome plated CrMo steel chainring bolt/nut sets (Track is NJS approved)
Blackspire Bruiser Beavertail Bash Guard
$60.00
- Thermoplastic Beavertail protects chainring from impacts - For 1X and 2X drivetrains
Sunlite Universal Chainguard
$15.59
- Universal bottom bracket style mount - 44T maximum chainring size - Impact-resistant plastic - Size: Universal - Application: BB Mount
TruVativ M15/M22 GXP Crank Arm Self-Extracting Bolts
$10.80
TruVativ Crank Arm Fixing Bolts - Monocoque carbon crankset with hollow-arm design - FSA Mega Tooth chainring design greatly improves chain retention - FSA BB392 compatibility allows use in nearly any frame - Bottom bracket not included
Hope Spider for Hope Cranksets
$55.00
Choose the Hope Crankset Spider you need for the chainring combination you want. - Interchangeable and replaceable on Hope Cranksets - Single chainring model for use with a single 104BCD chainring with or without bashguard - Double chainring model for use with a 64/104BCD double chainring setup - Allows installation of bashguard on outer position
North Shore Billet 1x11 Spider for SRAM Cranks
$70.00
The North Shore Billet 1×11 Spider replaces the removable chain ring spider so that you can run a SRAM XX1 chain ring on Truvativ X0, X01, X1, X9, GX, S2210, and S1400 cranks. There are no mounting holes for the granny ring and the single ring’s position is designed to give a better chain line throughout the entire gear range. The chain ring tabs accept an optional rock ring for All Mountain or Enduro riding.
Wheels Manufacturing Inc. BB30 Adapter for Campagnolo Cranks
$50.00
The Wheels Manufacturing BB30 Bottom Bracket Adapter for Campagnolo Ultra- Torque Cranks adapts Campagnolo Ultra-Torque cranks to BB30-standard frames. This adapter fits over the installed crank bearing so no bearing removal is required for installation. This adapter is machined from engineering-grade Delrin. - 48g/pr * The design of these adapters includes the use of the Campy bearings factory installed on the crank spindle.
Blackspire Double Ring Chain Guide Roller Kit
$12.34
- Includes replacement lower roller, 608 2Rs cartridge bearings, axle, bolts, and washers to fit Stinger and Dewlie chain guides
Shimano STEPS CITY E6000 Left Crank Arm
$27.00
- Replacement left-side crank arm for Shimano STEPS CITY E6000
Shimano STEPS CITY E6000 Right Crank Arm
$27.00
- Replacement right-side crank arm for Shimano STEPS City E6000.
Wheels Manufacturing Inc. BB30 Adapter for 22/24mm Spindle Cranks
$40.00
Wheels Manufacturing BB30 Bottom Bracket Adaptor for GXP Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
Sunlite Aluminum Low Profile Horizontal Square Crankarm (Left)
$19.99 - $20.99
- Horizontal square interface - Only includes left crank
Race Face Alloy Crank Boot
$9.99
Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)
Sunlite Aluminum Low Profile Crankarm (Left)
$15.99
• Square taper interface • Only includes left crank • 175mm length
FSA BB30 Crank Bolts
$13.99
- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms - Sold as singles
Wolf Tooth Components Set of 4 Chainring Bolts+Nuts For 1x
$19.95
Wolf Tooth designed these bolts to be the best on the market. These optimized single chainring bolts have a 4mm hex socket on the bolt and a 6mm hex socket on the nut...that's right, no more spanner for your single ring bolts! These are 6mm long so they work perfectly with any bolt on single chainring that does not have threaded standoffs. - 6mm length - Made in the US out of 7075 Aluminum Alloy - Has hex heads on both the bolt and nut for easy installation - Max torque of 6-7 Nm with light grease on threads only
Wheels Manufacturing Inc. 386 EVO Adapter for 24mm Spindle Cranks
$50.00
The Wheels Manufacturing 386 EVO Adaptor for Shimano Hollowtech II Cranks adapts Shimano cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (2) - 24mm ID adapters - (8 )- .7mm spacers
Wheels Manufacturing Inc. 30mm ID Crank Spindle Spacer
$4.50 - $6.25
Used to adjust crank chainline or ensure proper bearing preload when using 30mm spindle cranks. - Inner Diameter: 30mm - Outer Diameter: 41.5mm - Machined engineering-grade Delrin - Sold Individually
Sunlite Crank Dust Cap
$1.49
- Crank dust cap - Works with most three-piece crank models
Origin8 Thruster 1x Chainring Bolt Set
$5.99 - $7.99
- Chainring bolt sets are available in sets of four or five - Bolts have 5mm hex heads - Inner Length: M8x7.5mm Bolt (x4) / M8x7mm Nut (x4) - Material: Steel - Type: 1x
Origin8 Thruster 1x Direct Mount Spider
$33.99 - $49.99
Forged AL6061-T6 alloy spiders for Origin8 Thruster Series modular cranksets - SRAM 3-bolt interface for crank arm mounting - Available in both single and double chainring configurations for MTB, Boost/Fat, and Road/Cross/Gravel applications - BCD: 104mm 4-Bolt - Type: 1x
Page 1 of 5 Next page