Brakes/Levers/Pads

- Pad sets include pads and retraction spring for one caliper

- Bleed kits for all Formula brakes (R1/One/RX/Mega/RO)

- Allows the use of a 6-bolt/44mm-BCD disc rotor on a 35mm-spline CenterLock hub

- Bleed kits for all Formula brakes (R1/One/RX/Mega/RO)

Right brake lever designed for freestyle BMX U-brakes. - Cold forged - Reach adjustment - Right lever only

Right brake lever designed for freestyle BMX linear pull brakes. - Cold forged - Reach adjustment - Right lever only

This rear Mini V-Brake is made with cold-forged arms for strength and durability. - Linear pull and linear spring design - Dual spring tension adjustment - Sized to fit Mini and Micro BMX racing frames

This rear V-Brake is made with cold-forged arms for strength and durability. - Linear pull and linear spring design - Dual spring tension adjustment - 22mm brake pad adjustment - Sized to fit Expert and Pro BMX racing frames

- Short 85mm forged aluminum arm linear brake, for use with standard pull levers, STI - Ideal for Touring, Cyclocross, BMX, etc - Micro-adjust linear springs and angle adjustable threaded pads included

-Single compound cartridge road brake pad inserts

-3XC triple compound cartridge road brake pads

-3XC triple compound cartridge v-brake pad inserts

- High friction compound for improved stopping. - Set includes mounting hardware. - Compatible w/ all existing V-brake designs.

• Durable organic pad compound • Quiet and powerful braking performance for all weather conditions

-Single compound cartridge v-brake pads

Bleed fittings specifically designed for Hayes hydraulic disc brakes.

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

- Prime 2-piece rotors are for Prime Pro and Expert brakes only - L-series, lightweight one piece rotors - V-cut profile steel rotors for optimum weight-to-performance ratio. Increased surface area over previous designs increases power while cutouts and drillings help keep pads clean - Rotors includes: (1) 6-bolt/44mmBCD rotor, (1) Torx wrench, and (6) T-25 rotor mounting bolts with thread retaining compound - 205g @ 203mm

Miscellaneous replacement small parts for Hayes hydraulic disc brake systems. - Includes piston and seal

Caliper Mounting Bolts for Hayes hydraulic disc brake systems.

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap

Externally fitting service parts for Hayes hydraulic disc brake master cylinder

Replacement levers pivots pin kit for Hayes hydraulic disc levers

- Prevents pads from becoming dislodged from pistons when transported without rotor inserted in caliper - Sold (10) per bag

Hose fittings for Hayes hydraulic disc brakes available a la carte. Hayes brake compatibility: - HFX-9 - Prime - Sole - El Camino - Radar

Hose fittings for Hayes hydraulic disc brakes

For use with 2000+ Hayes 74mm eye-to-eye calipers (adapters/calipers for 22mm mounts are no longer available) - (IS) International Standard 51mm tabs; (QR) Quick Release; (TA) thru-axle - Note: Fox-36/40 (thru-axle), Rock Shox Pike (Maxle), and Psylo (Tullio) axle forks use IS-QR adapters

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts