Pumps/Inflation

Big volume barrel while Dual-Action (DA) doubles volume with each stroke and inflates tires up to pressure fast. Integrated dust cap keeps pump head clean and thumb lock lever insures air-tight seal. Specs - HEAD: Presta / Schrader / Dunlop with integrated dust cap - BARREL: Aluminum - THUMB LOCK / HANDLE: Plastic - CAPACITY: 60 psi / 4 bar - VOLUME PER STROKE: 81.4 cc (pull + push) - SIZE: 22.3 x 4.6 x 3.4 cm / 8.8” x 1.8” x 1.3” - WEIGHT: 126 g / 4.44 oz Added Features - Dual-action pumping head - Side mount bracket

A precision fork and shock pump with an easy-to-read dial gauge for accurate pressure readings up to 360 psi / 24.8 bar. An air release button and Pressure-Rite connector makes setting proper pressure easy and eliminates air loss when disconnecting, while the flexible hose takes stress off the valve stem when pumping. - Head: Pressure-Rite shock valve - Guage: 360 psi / 24.8 bar, Analog - Handle: Dual density polymer - Dimensions: 21.5 x 4.5 x 4.3 cm / 8.5" x 1.8 x 1.7" - Volume per stroke: 11cc - Barrel: Aluminum - Pressure Tuning: Air release button - Features: Flexible rotating hose - Weight: 170 g / 5.98 oz

Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.

The Road Stick is a great mini-pump, sized just right for your jersey pocket or pack. It has a soft ergonomic handle that flips out for easy leverage. The easy-to-use thumblock head is Schrader and Presta compatible, plus the lightweight aluminum barrel is durable to provide years of use.

The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.

Get accurate and precise results every time with RockShox's High-Pressure Digital Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large digital BAR/PSI readout. It runs off one CR2032 battery (included) and the hose swivels 360-degrees to fit anywhere.

Keep your suspension pressure dialed-in with RockShox's High-Pressure Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large gauge. The hose swivels 360-degrees to fit anywhere.

CO2 replacement cartridges Planet Bike's line of CO2 replacement cartridges make tire repairs quick and easy. - Our CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators - Planet Bike cartridges are tested to the highest standards for durability, safety and reliability. They contain pure CO2 with no oils or contaminants. - Note - unable to ship CO2 to Canada - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2. - All 16g cartridges are compatible with the Airship 2.0.

CO2 replacement cartridges Planet Bike's line of CO2 replacement cartridges make tire repairs quick and easy - Our CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators - Planet Bike cartridges are tested to the highest standards for durability, safety and reliability. They contain pure CO2 with no oils or contaminants - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2 - All 16g cartridges are compatible with the Airship 2.0

Planet Bike's Ozone ATB Comp Mini-Pump is a ride-saver. For easy pumping and fast fills, it boasts a locking T handle, an easy pumping action and a thumblock head (with a cap to keep the mud out). This great inflator fits all valves and is small enough to carry in a pack or pocket, or you can use the included frame mount.

High-pressure shock pump with gauge Our Shockmate 3.0 high-pressure bicycle suspension pump is designed to efficiently and accurately maintain your bike’s suspension to ensure that your shocks are neither too stiff nor too soft. It's compact and rugged and features an 8" swivel hose and alloy valve head for secure attachment and easier pumping. The easy-to-read gauge and bleeder valve help you fine-tune the suspension sag on your bike's front and rear shocks to give you the best ride performance. Whether you have a mountain bike with full suspension or just a fork shock, take the Shockmate 3.0 along on your next backcountry adventure. - Compact and rugged design is ideal for backcountry adventures - Locking T-handle for comfortable and efficient pumping at high pressure - 8" swivel hose and alloy valve head for secure attachment and easier pumping - 1.5" industrial grade gauge is precise and easy to read when setting suspension shock sag - Bleeder valve for fine-tuning pressure - Rebuildable - Length: 260mm - Weight: 149 grams

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

Easy to use, powerful, durable and economical, Park Tool's PFP-8 Home Mechanic's Floor Pump has a place in every garage and home bike shop and is perfect to take along to cycling events, too! It inflates like a champ thanks to its sturdy steel barrel, tough handle, composite thumblock head that fits Presta and Schrader valves, sturdy steel base, long hose and extra-large, easy-to-read gauge.

Park Tool's Micro Pump is a super small micro pump that fits in just about any bag or jersey pocket or mounts directly to the frame. Ideal to take along when space and weight are an issue. Aluminum barrel with a locking dual head and soft-touch dual-density flip out handle. - Presta and Schrader valve compatible - Maximum pressure: 100 psi / 7 bars - Weight: 3.7 ounces (105g) - Length: 7 7/8" (200mm) - Includes mounting hardware to securely attach to water bottle bosses or under bottle cage

Small enough to carry along yet big enough to pump efficiently. The PMP-4.2 comes with a handy holder that bolts under a water bottle cage and holds the pump securely. All-aluminum barrel construction ensures long life and smooth operation. - Presta- and Schrader-valve compatible - Includes mounting hardware to securely attach to water bottle bosses or under bottle cage - Maximum pressure 90 PSI/6bars - Approximate weight 4.6oz/130 grams - 10.5 inches in length (265mm)

The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.

The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit has a water bottle cage as well as everything needed for common road-side fixes: an eight-piece multi-tool, three tire levers, CO2 inflator & cartridges. - Lightweight composite water-bottle cage - Three MSW tire levers - Eight-piece flat pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Windstream Push-On CO2 inflator head - Two 20g CO2 cartridges

Genuine Innovations' AirChuck Elite offers Push-To-Inflate technology for fast, easy & controllable single-handed CO2 bicycle tire inflation! • Cartridge compatibility: 12, 16, 20, 25 gram threaded CO2 cartridges & Big Air! (not 45-gram cartridges) (each sold separately) • All metal aluminum design • Easy to use and fully controllable • Push-to-Inflate technology • Works with both Presta and Schrader valves • Includes one 16 gram and one 20 gram threaded CO2 cartridge • Weight: 16 grams

One tubeless bicycle tire tool to rule them all. Compact and versatile, this is the ultimate tubeless tire repair tool. Never get stuck on the side of the trail again! Self-contained tire repair kit includes: - 5 tubeless repair plugs - 2 Presta core valves - Integrated valve core removal tool - Small, strong plugger tool - Alloy weatherproof storage capsule

Comfortable, durable and most of all reliable, the Ultraflate is Genuine Innovations' most tried and true cupped inflator. Its reinforced glass nylon construction and brass internals means it can take the strain of everyday use and still maintain precision inflation performance. - Trigger-controlled technology for fast, easy and controllable CO2 inflation - Built-in "trigger lock" to prevent accidental discharge - Compatible with non-threaded 20 gram CO2 cartridges and threaded 16 gram, 20 gram and 25 gram CO2 cartridges - Works with both Presta and Schrader valves - Store a non-threaded 20 gram CO2 cartridge in the cup Includes (1) Ultraflate inflator head (1) non-threaded 20 gram CO2 cartridge

If it was any lighter, you'd be walking home. This is the smallest pump you'll ever use that will still get your flat fixed and you on your way again. There are no extra features here. Just the bare minimum to get your tire back up and you kicking butt. Because you can't kick butt with a flat tire. - Presta head only - High Volume or High Pressure - Includes frame mount - 85 gr/ 3oz - 160 PSI, 11 Bar maximum

Perfect Pressure. Every Ride. At nearly 28 inches tall, the Core 3 towers over most floor pumps. The 48-inch-long hose is long enough to get air pressure to anywhere you could need it. Like the Pro, the Core 3 features our AirTap head that fits Schrader/Presta/Dunlop valves and has a pressure bleed button built in. We also integrated the easy to read, 3-inch gauge into the massive steel base of the Core 3 to help it have a rock solid stance. - Dimensions: 5.5 x 9 x 26.25 inches Airtap Core Pump Head - Our AirTap reversable pump head works with Schrader, Presta or Dunlop valves and features an integrated air bleed button right at the valve for perfect pressure, every time. Aviation Guage - The 2.5-inch-wide base-mounted gauge lets you easily read your tire pressure, and adds to the footprint of the Core 2 pump's solid stance. Steel is real, strong - The base and barrel of the Core 3 are constructed of steel to withstand a lifetime of (ab)use. Air Bleed - Button on the pump head to micro-adjust pressure.

A Shop Quality Precision Pump For The Home Mechanic. Meet the Core Pro, our top of the line floor pump. Constructed of durable 6061 Alloy, the Pro stands at nearly 29 inches tall, giving it the largest air chamber in our line. That means less pumps for greater pressure. The Pro also boasts a 51-inch hose to reach your bike, even if it's on the back of your car. Our AirTap head is designed to be compatible with Presta, Schrader and even Dunlop valves and it features an in-line bleed button for pressure perfection. Did we mention it might just be the best looking cycling accessory you own? Airtap Core Pump Head - Our AirTap reversible pump head works with Schrader, Presta or Dunlop valves and features an integrated air bleed button right at the valve for perfect pressure, every time. Aviation Gauge - The massive, 3-inch-wide base-mounted gauge lets you easily read your tire pressure, and adds to the footprint of the Core pump's solid stance. Extra-Long Hose - Whether your bike is on a hitch rack, in the work stand or at the trail head, we've got you covered. The Core Pro floor pump boasts a 51-inch-long hose to reach just about anywhere. 6061 Alloy Construction - The handle, air chamber and base of the Core Pro are constructed of 6061 alloy. Strong enough for aircraft means it's a perfect material for a shop-level floor pump.

Can you tell the difference between 15psi and 17psi? No you can't. We can't either, but Blakburn's digital gauge can. Today's wider, lower pressure tires are more pressure-critical than back when we just used to put as much pressure in as the pump could stand. It's not about fending off flats these days, it's about grip. And the difference between too much and not enough can be as little as a couple of pounds of pressure. The days of "giving it a squeeze" are over. - Swivel/Dual Head - Backlit Display - Accurate within 1% of pressure - Rated from 1-150 PSI - Key Chain Loop - 0.30lbs

You’ve paid for full suspension, now it’s time to use all of it. When the trail gets steep and rough, can you tell the difference between 150psi and 170psi by pressing down on your saddle? No, you can't; and neither can we. The Blackburn Honest Digital Shock Gauge can. With pro shop-level precision, and a zero leak valve, the digital readout will ensure you put exactly the pressure you need in your shock. The days of "giving it a bounce in the lot" are over! - Accurate within 1% of pressure - Compatible with all thread on air shocks - Rated to 350 PSI/24 BAR Max - Shop precision quality - Zero leak valve - Replaceable battery - Auto on/off - Easy to read digital gauge - 215g

Easy to use and compatible with Presta and Schrader valves, the Twin graph is an intuitive gauge that allows an efficient measure of your tire's pressure. - Fits Presta/Schrader - Accurate up to 160psi - Shows PSI and bar - Weighs only 37g

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

VIAIR's TLC Dispenser features smooth mechanisms paired with high-quality rubber seals for quick and efficient on the go inflation. The compact design allows for easy storage and the lightweight construction adds virtually no weight to your gear. FEATURES: – Metal body construction – High-Quality rubber seals – On/off twist cap – Adjustable air flow – Precision cut threads

The TLC LITE is the indispensable essential that provides a simple solution for on-the-go bike and vehicle tire inflation. The kit features a 30ft coil hose and a shop-style inflator with rotating Presta and Schrader attachments. The compressor charges the coil hose to 105PSI, storing enough air to provide a blast for seating tubeless bicycle tires, and it is capable of inflating vehicle tires up to 225/60R18. The TLC LITE comes in a rugged steel case with a durable handle, and is powered by simply plugging into your vehicle's power port. The compact dimensions make it easy to store in your vehicle, keeping it out of the way and ready whenever you need it. FEATURES: – Shop-Style Inflator with 120 PSI Gauge – Fully Rebuildable Presta Head Attachment – 90° Twist-on Schrader Attachment – 30ft. Inside Braided Coil Hose – Deluxe Carry Bag – Accessory Power Plug – Durable Leather Tipped Handle SPECIFICATIONS: – 12-Volt – Permanent Magnetic Motor – Duty Cycle: 10% @ 100 PSI – Max. Working Pressure: 105 PSI – Max. Amp/Watt Draw: 13A/156W – Ingress Protection Rating: IP54 – Max. Ambient Temp: +158°F – Min. Ambient Temp: -4°F – Dimensions: 9.64?L x 4.33?W x 9.68?H – Net Weight: 4.44 lbs. – Air Hose Length: 30 ft. – Power Cord Length: 10 ft.

The TLC PLUS is a high-performance compact compressor meant for on-the-go bike and vehicle tire inflation. The kit features a 30ft coil hose and a shop-style inflator with rotating Presta and Schrader attachments. The compressor charges the coil hose to 120PSI, storing enough air to provide a blast for seating tubeless bicycle tires, and it is capable of inflating vehicle tires up to 31". The TLC PLUS comes in a durable carry bag and can be used as a portable or hard-mounted to the vehicle using the SAE battery clamps or terminal ring attachments included. The compact dimensions make it easy to store in your vehicle, keeping it out of the way and ready whenever you need it. FEATURES: – Thermal Overload Protector – Shop-Style Inflator with 120 PSI Gauge – 120 PSI Pressure Gauge with Rubber Boot – Fully Rebuildable Presta Head Attachment – 90° Twist-on Schrader Attachment – 30ft. Inside Braided Coil Hose – 2-Pin SAE Connection with Battery Terminal and Clamp Options – Deluxe Carry Bag SPECIFICATIONS: – 12-Volt – Permanent Magnetic Motor – Duty Cycle: 30 min. @ 30 PSI – Max. Working Pressure: 120 PSI – Max. Amp Draw: 23-Amps – Ingress Protection Rating: IP54 – Dimensions: 6.8?L x 3.7?W x 6.5?H – Net Weight: 5.75 lbs. – Power Cord Length: 6ft.

The TLC PRO was made for the adventure enthusiast who wants the best equipment for on-the-go bike maintenance and vehicle tire inflation. The kit features a 30ft coil hose, a shop-style inflator with rotating Presta and Schrader attachments and a blow gun. The compressor charges the air reservoir and coil hose to 150PSI, storing enough air to provide a blast for seating tubeless bicycle tires, performing blowing tasks, running certain air tools and it is capable of inflating RV and truck tires up to 35". The TLC PRO comes in a deluxe carry bag and can be used as a portable or hard-mounted to the vehicle using the SAE battery clamps or terminal ring attachments included. The compact dimensions make it easy to store in your vehicle, keeping it out of the way and ready whenever you need it. FEATURES: – Shop-Style Inflator with 160 PSI Gauge – Fully Rebuildable Presta Head Attachment – 90° Twist-on Schrader Attachment – 30ft. Inside Braided Coil Hose – Blow Gun – Extruded Aluminum Air Tank – 2-Pin SAE Connection with Battery Terminal and Clamp Options – 40-Amp Inline Fuse Holder – Vibration-Resistant Diamond-Plate Sand Tray – Deluxe Carry Bag SPECIFICATIONS: – 12-Volt – Permanent Magnetic Motor – Duty Cycle: 33% @ 100 PSI – Max. Working Pressure: 150 PSI – Max. Amp Draw: 30-Amps – Ingress Protection Rating: IP54 – Dimensions: 10.87?L x 5.83?W x 7.48?H – Net Weight: 11.80 lbs. – Power Cord Length: 8 ft. – Air Hose Length: 30 ft.

- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly

The world’s first CO2 inflator with tire gauge provides tire-inflation and tire-pressure measurement. The angled head fits Presta and Schrader valves and a special feature allows the user to adjust the flow while filling the tire. Dual-end design allows for one-cartridge storage. - CO2 inflator that features a gauge as well - Flow is adjustable using special feature - Compatible with both Presta and Schrader valves - Presta/Schrader with integrated dust cap, Push to inflate - Gauge: Reads 160 psi / 11 bar, 1-1/2” analog - Engineering-grade polymer - Weight: 45g /1.59 oz - Size: 6.5 x 5.2 x 3.3 cm / 2.5” x 2” x 1.3” - Accepts threaded cartridges - CO2 cartridges sold separately

The king has returned to rule! The new JoeBlow Ace DX features an innovative three-stage design that achieves both high pressures and high volume in record time. Stage one opens both barrels for big volume to reach 60 psi with 30% less effort than standard floor pumps. Stage two uses the main barrel only for pressures up to 120 psi while stage three engages the small barrel to achieve an amazing 260 psi. Two tone padded handles, wide stable base and new 4” base mounted analog gauge make inflation easy. The new SmartHead DX1 automatically adjusts to fit Presta and Schrader valves without swapping parts and the lower profile air release button makes getting the right pressure easy. Includes ball and air bladder type inflation needles. - SmartHead DX1 full metal pump head w/ air release button & x-long hose - Gauge: 260 psi / 18 bar; 4” base mount analog - Base: Aluminum/Rubber - Barrel: Anodized aluminum - Handle: Oversize dual tone - Weight: 2.45 kg / 5.4 lb - Size: 74 x 28 x 22 cm/29.1” x 11” x 8.7”

Topeak's Joe Blow Max HP quickly inflates tires with a durable steel barrel, a sturdy composite base, a padded handle, and a tight-sealing TwinHead that fits Presta, Schrader and even Dunlop valves. You'll also appreciate the extra-long hose and big, easy-to-read gauge.

Air up your mountain bike tires in a hurry with Topeak's Joe Blow Mountain floor pump. Its large diameter steel barrel, sturdy composite base and oversized padded handle make inflating high volume tires an easy task. For versatility, its double-sided TwinHead pump head tightly grips both Presta and Schrader valves. And, you'll appreciate the easy-to-read gauge.

The aero-shaped barrel and wide steel base provide stability when pumping and the 3” top mounted gauge is easy to read up to 200 psi (14 bar). The large padded handle provides comfort while the extra-long and tangle-free hose can even reach wheels on bikes mounted in a stand. The SmartHead DX3 with lower-profile air-release button automatically adjusts to fit either Presta or Schrader valves and makes getting the right pressure a simple task.

The Topeak JoeBlow III continues the tradition of setting the benchmark for floor pump durability and performance while ushering in upgrades with an enlarged 3-inch chronograph-inspired gauge and hammer-style TwinHead DX pump head. A durable steel barrel and base as well as an ergonomic padded handle make inflating tires a breeze. - Presta / Schrader / Dunlop-compatible - Max 160psi / 11bar - Volume per stroke: 317.5cc - 3.7lbs / 1.68kg - Ball and bladder needles included

Topeak's Joe Blow Sprint quickly inflates tires thanks to its durable aluminum barrel, a sturdy steel base, a tight-sealing aluminum thumblock head that fits Presta and Schrader valves and an oversized, padded handle. And, the easy-to-read, top-mounted gauge lets you dial in the perfect pressure every time!

This clever dual-gauge floor pump was exclusively designed for low pressure Fat-Bike tires and moderate pressure MTB tires. A massive oversized barrel is 1.5 times larger than a standard floor pump and delivers large air volume to fill oversized tires quickly. A 30 psi (2 bar) gauge shows precise low pressure for Fat-Bike tires while the 75 psi (5 bar) gauge shows higher pressures for MTB tires. An air release button on the TwinHead™ allows for fine-tuning pressure.

This pump is equipped with a hardened steel base, solid steel barrel, and an easy to read top mounted analog gauge. An extra long hose with a TwinHead pump head makes it easy to reach valve stems and the integrated mini tool carrier keeps what you need for light maintenance close at hand.

An easy-to-read top-mounted digital gauge with rubber bumper impact protection delivers accurate tire pressure readings up to 200psi / 14bar. The large padded handle provides comfort while the wide steel base keeps everything stable. The extra-long hose can even reach bikes mounted in a work stand. The SmartHead DX3 automatically adjusts to fit Presta or Schrader valves and a new lower-profile air-release button allows fine tuning of tire pressure while preventing unintended pressure release. - Head: SmartHead DX3 w/ air release button & extra-long hose - Barrel: Painted steel - Gauge: 200 psi / 14 bar, Top mounted digital (Tolerance : < 100 psi ± 1 psi / > 100 psi ± 1%) - Unit: psi, bar, kg / cm² - Battery: CR2032 x 1 (included) - Volume Per Stroke: 337cc - Handle: Oversize padded / Dual density polymer - Base: Hardened steel - Cushioned rubber for digital gauge protection, auto off, Dunlop valve adapter, Presta valve adapter, Ball / bladder heads, Hose dock - Size: 73.5 x 25.5 x 16.4cm / 28.9" x 10" x 6.5" - Weight: 1.97kg / 4.34lb

The JoeBlow Sport with unique 2-stage design delivers both high pressure and high volume in record time. Stage one opens both barrels for huge volume, reaching 30 psi with 30% less effort than standard floor pumps. Stage two utilizes the small barrel for pressures up to 160 psi. Hammer type TwinHead DX5 pump head with an extra-long and tangle-free hose makes it easy to reach valve stems. A durable steel barrel and large steel base provide extra stability. - Head: Hammer type TwinHead DX5, Presta / Schrader / Dunlop valves with extra-long 360 pivot hose - Barrel: Painted steel / anodized aluminum - Gauge: 160 psi / 11 bar, 3" mid mount analog Stage 1 : 0 - 30 psi Stage 2 : 30 - 160 psi - Volume Per Stroke: 715cc (Stage 1), 258cc (Stage 2) - Handle: Oversize / Dual density polymer - Base: Hardened steel - Ball / bladder heads, Hose dock - Size: 74 x 26.6 x 18cm / 29.1" x 10.5" x 4.6" - Weight: 2.5kg / 5.51lb

An easy-to-read mid-mounted digital gauge delivers accurate tire pressure readings up to 160psi / 11bar. Hammer type TwinHead DX5 pump head with an extra-long, tangle-free hose makes it easy to reach valve stems. A durable steel barrel and large steel base with ergonomic padded handle make it easy to get your ride up to pressure fast. - Head: Hammer type TwinHead DX5, Presta / Schrader / Dunlop valves with extra-long 360 pivot hose - Barrel: Painted steel - Gauge: 160 psi / 11 bar, Mid mounted flip-down digital (Tolerance: < 100psi ± 1 psi / > 100psi ± 1%) - Unit: psi, bar, kg / cm² - Battery: CR2032 x 1 (included) - Volume Per Stroke: 318cc - Handle: Oversize padded / Dual density polymer - Base: Hardened steel - Cushion rubber for digital gauge protection, auto off, Ball / bladder heads, hose dock - Size: 68 x 25.4 x 18cm / 26.7" x 10" x 4.6" - Weight: 1.8kg / 3.97lb

Topeak's Micro Rocket AL is a small pump that packs a punch. Small in stature, this 6.3-inch pump is a giant in tire inflation. It utilizes a compact, single-action design to blast tires up to 160 psi.

Topeak's Mini Dual is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. And, the thumb-lock head ensures an airtight seal on both Presta and Schrader valves.

Topeak's Mini Dual DX is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. And, their thumb-lock SmartHead ensures an airtight seal on both Presta and Schrader valves.

Topeak's Mini Dual DXG is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. Topeak's thumb-lock SmartHead ensures an airtight seal on both Presta and Schrader valves and the built-in gauge lets you top off your tires with precision.

Topeak's Mini Dual G is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. Topeak's thumb-lock head ensures an airtight seal on both Presta and Schrader valves and the built-in gauge lets you top off your tires with precision.

Topeak's Mini Morph is the perfect answer for riders who've had trouble deciding if they want a frame or floor pump. The Mini Morph is both! For maximum pumping power, it features a high-volume aluminum barrel, a fold-out base, a long hose and a T handle. A frame mount is included, too.

The smallest Morph is still big on features. Fills both fat and skinny tires with ease, fold out foot pad for hassle-free inflation. Includes in-line gauge for perfect inflation every time.

Mounting kit for Mini Morph and Road Morph G.

Larger barrel version pumps more air volume for MTB riders. Large integrated 1-1/8" diameter easy-to-read analog gauge provides the perfect inflation every time. Dual-Action (DA) doubles volume with each stroke and inflates tires up to pressure fast. Integrated dust cap keeps pump head clean and thumb lock lever ensures an air-tight seal. - Head: Presta / Schrader / Dunlop with integrated dust cap - Barrel: Aluminum - Thumb Lock/Handle: Polymer - Capacity: 60psi / 4bar, 1-1/8” Analog - Volume Per Stroke: 82 cc (pull + push) - Side mount bracket secures to water bottle bolts - Size: 25.3 x 4.6 x 3.4cm / 10” x 1.8” x 1.3” - Weight: 152g / 5.36oz

Like bringing your floor pump on the trail. High-volume barrel fills fat tires fast while fold-out foot pad and flexible hose make inflation a snap. - Head: Presta/ Schrader/ Dunlop Valves - Barrel: Butted Aluminum - Thumb Lock: Plastic - Handle: T-Type Plastic/Kraton - Capacity: 160 psi / 11 bar - Added Features: Fold-out Foot Pad - Flexible Hose - Centerline Mount Bracket - Size (L x W x H): 35 x 5.8 x 3 cm - 13.8" x 2.3" x 1.2' - Weight: 250g / 8.80 oz

The Mountain TT G Twin Turbo pump has a large, integrated 1-1/8"-diameter easy-to-read analog gauge. It fills both large-volume fat bike tires and higher pressure MTB tires with ease. TwinTurbo technology uses both strokes to compress air to deliver high-pressure output and saves time and effort. Integrated dust cap keeps pump head clean and thumb-lock lever ensures an air-tight seal. - Head: Presta / Schrader / Dunlop with integrated dust cap - Barrel: Aluminum - Thumb Lock/Handle: Polymer - Capacity: 60psi / 4bar, 1-1/8” Analog - Volume Per Stroke: 91cc - Added Features: Side mount bracket - Size: 25.3 x 4.9 x 4cm / 10” x 1.9” x 1.6” - Weight: 227g / 8oz

Mountain TT Twin Turbo pump fills both large volume fat bike tires and higher pressure MTB tires, as well as gravel bike tires with ease. TwinTurbo technology uses both strokes to compress air to deliver high pressure output and saves time and effort. Integrated dust cap keeps pump head clean and thumb lock lever ensures air-tight seal. Specs - HEAD: Presta / Schrader / Dunlop with integrated dust cap - BARREL: Aluminum - THUMB LOCK / HANDLE: Plastic - CAPACITY: 120 psi / 8 bar - VOLUME PER STROKE: 90.9 cc - SIZE: 22 x 5 x 4 cm / 8.7” x 2” x 1.6” - WEIGHT: 192 g / 6.77 oz Added Feature - Side mount bracket

Reach peak inflation pressure in a flash with Topeak's Peak DX II. Its butted-aluminum barrel and folding T-handle makes pumping up tires a snap! Plus, the thumb-lock SmartHead grips tight on both Presta and Schrader valves.

Topeak's Peakini II is a powerful mini pump that's ideal for road and trail use. It sports a reversible head so you can pump both your Schrader and Presta valves with ease. And, its highly efficient, single action design and T-handle mean you'll be back out riding after a flat quicker than ever.

Topeak's Pocket Rocket boasts an aluminum barrel for superb function, durability and max pump power, while its plastic handle ensures pumping comfort. And, its aluminum thumb-lock head fits both Presta and Schrader valves.

Topeak's Pocket Rocket DX II boasts an aluminum construction for superb function, durability and max pump power. And, its aluminum thumb-lock head fits both Presta and Schrader valves.