Wheels

Campagnolo BORA WTO 33 Front Wheels. Each component of these wheel has been optimized in the wind tunnel in order to improve aerodynamic performance. The wheel features carbon rims with a unidirectional aerodynamic finish, new aerodynamic aluminum hubs, and the ceramic USB cup-and-cone bearing system: every design choice has been made with a view to optimizing performance. The profile of the rim, which has an internal width of 19mm, corresponds perfectly with 23 mm, 25 mm and 28 mm tires. In addition, with the 2-Way Fit version, Campagnolo offers its tried-and-tested technology with full compatibility with clincher and tubeless tires. - Hub/Brake Compatibility: Center-Lock Disc - USB cup-and-cone bearing system - Wheel Size: 700c - ISO Diameter: 622 / road / 29" - Tire Type: Clincher, Tubeless Ready Clincher

The Rampage rear wheel rolls on a four-bearing sealed cassette hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 10T chromoly driver with 3-pawl system. Its designed for BMX 110mm wide frames. - Axle: 14mm chromoly - Driver: 1-pc chromoly RHD, 10T - Driver bearings: 6802 (x2), verify bearing number on side of rubber seal - Driver pawls: 3 Pawl - Driver spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub shell bearings: 6902 (x2) verify bearing number on side of rubber seal - Drilling: 36H

The EC70 AX wheels connect EC70 carbon rims to our proven X5CL hub with 28 3x double butted Sapim straight pull spokes. End cap and axle components are available for all major industry standards. Wide, 24mm internal rims are optimized for gravel tires 35mm and larger, giving you a more confident tire stance for control on the ground during your expansive adventure rides, single track forays and unrelenting gravel races. Our Easton Overland team and SDG Muscle Monster team riders have put these wheels to the test, racing prototypes at DK200, with Amity Rockwell taking the DK Queen title and Amanda Nauman finishing 6th, while at Lost and Found 2019 Michael Van Den Ham came in 4th and Craig Richey took 6th.

The EC70 AX wheels connect EC70 carbon rims to our proven X5CL hub with 28 3x double butted Sapim straight pull spokes. End cap and axle components are available for all major industry standards. Wide, 24mm internal rims are optimized for gravel tires 35mm and larger, giving you a more confident tire stance for control on the ground during your expansive adventure rides, single track forays and unrelenting gravel races. Our Easton Overland team and SDG Muscle Monster team riders have put these wheels to the test, racing prototypes at DK200, with Amity Rockwell taking the DK Queen title and Amanda Nauman finishing 6th, while at Lost and Found 2019 Michael Van Den Ham came in 4th and Craig Richey took 6th.

- 45mm deep aerodynamic carbon disc brake wheelset - Wind Tunnel Optimized rim profile, aerodynamic aluminum hubs, and USB ceramic bearings for optimal performance in all conditions - 2-Way Fit tubeless-ready rims with 19mm internal width, optimized for use with wider tires - G3 spoke lacing front and rear for maximum power transfer and braking performance - Black-on-black Dark Label graphics - Only 1520g per pair

Centerlock hubs on tubeless-ready rims. Includes convertible endcaps for Quick-release and Thru-Axle

- STW ST1 26.5mm wide alloy rims - KT QR ATB 9mm/100/108 axle - Black or Silver UCP spokes

The best price on the market for a wheel meant to be ridden. Single-wall rims and hubs that come out of the box round and true.

The ARC 1400 DiCut wheels also benefit from the AERO+ profile supporting safe riding in the aero position through optimal aerodynamics. The combination of new and proven aero components allows cyclists to control many riding situations at high speeds. - AERO+ optimized rims by Swiss Side - Stainless steel bearings

The XMC 1200 Spline is the ultimate all mountain wheel. A carbon layup specifically tuned for all mountain use makes the rim tough yet super-light. The hubs feature the latest incarnation of DT's Ratchet System. Extremely refined machining and fully lasered graphics make them the lightest hubs DT Swiss has ever made. Together with bladed top-end spokes and perfect DT Swiss build quality, this wheel is made to ride trails with speed and confidence. - Requirement-specific carbon rims are designed for the ultimate all-mountain riding experience - The carbon rim combined with the DT Aerolite and DT Aero Comp spokes ensure perfect wheel stiffness - The low weight of the 1200 Spline reduces the moment of inertia and increases acceleration, leading to higher average speeds compared with aluminum wheels with the same energy input - 180 straightpull hub is a lighter, stiffer, and more durable hub - Alloy presta valve is lightweight - Wheels are tubeless ready, with a rim design that ensures a precise and safe fit of the tire even when ridden hard - Nipples have DT Pro Lock to prevent the spoke-nipple connection from loosening - 3 cross spoke pattern, DT AeroComp straight pull spokes, DT ProLock Squorx ProHead aluminum spoke nipples

The aluminum Enduro wheelset made for the roughest Enduro tracks around the world. We have taken all our aluminum wheel know-how and put it into this high-performing package. EX 1700 SPLINE wheels are based on our famous 36T RATCHET hubs combined with a super-strong and welded 30mm-wide aluminum rim. The rim profile is designed to withstand the hardest use of Enduro racing while still keeping the weight low for long and demanding uphills. Laced to double-butted competition straightpull spokes, the EX 1700 SPLINE wheels are built to take a beating.

Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel. - Intended use = All-Mountain/Trail, Enduro and Freeride - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

The HXC 1501 SPLINE ONE LS are extra lightweight carbon eMTB wheels are engineered for riders looking for outstanding agility. Thanks to the low weight carbon rims, riders benefit from increased agility and dynamism when going uphill and downhill, while withstanding the increased torques of eMTBs. The spokes were designed with specific diameters to align light weight and resistance. Inside the 240 hub, oversized bearings support the additional loads of eMTBs. Each component has been designed with the specific aim of delivering advanced agility to find flow and fun on the trails. - Built to provide ultimate riding agility for light eMTBs - Perfect balance between low weight and resistance, ready to go faster in the ups and the downs - Hybrid-specific spoke design provides an advanced riding experience, combining resistance and lightweight - The 240 Hybrid LS hub features larger bearings for improved durability and rolling efficiency

A carbon structure optimized for impact resistance, a reinforced flange and the ideal resin-carbon fiber ratio make the EXC 1200 Spline the benchmark in the Enduro sector. The rim's inherent strength allows the use of extremely lightweight Aerocomp and Aerolite spokes and generates optimum wheel stiffness. The heart of this wheel is a 180 Straight Pull hub with smooth-running SINC Ceramic bearings and the newest Ratchet EXP freehub system. - Requirement-specific carbon rims are designed for the ultimate enduro riding experience - The carbon rim combined with the DT Aerolite and DT Aero Comp spokes ensure perfect wheel stiffness - The low weight of the 1200 Spline reduces the moment of inertia and increases acceleration, leading to higher average speeds compared with aluminum wheels with the same energy input - 180 straightpull hub is a lighter, stiffer, and more durable hub - SINC ceramic hub bearings are engineered with optimum bearing clearance for minimum friction - Wheels are tubeless ready, with a rim design that ensures a precise and safe fit of the tire even when ridden hard - Nipples have DT Pro Lock to prevent the spoke-nipple connection from loosening - 3 cross spoke pattern, DT ProLock Squorx ProHead aluminum spoke nipples

Versatility. A mountain bike is meant to go up and down mountains and to provide fun while doing so. The H1700 Spline do precisely that. And since e-bikes allow the rider to go up and down many mountains in one ride, reliability and weight is key. - 350 based Spline hub - E-bike specific straight pull spokes are built with a 3-cross pattern - Includes tubeless tape and tubeless valve

Enter the Cross-Country world with the X 1900 Spline wheels. The 25 mm wide aluminum rim offers modern tires the support needed to ride low air pressure in order to minimize rolling resistance. Meticulous wheel building by hand ensures the highest quality and reliability, allowing riders to just focus on the moment - whether it is beating the sweat out of their opponents or beating their own KOM or QOM.

Are you already planning your next bikepacking trip? The GR 1600 wheels are made for gravel adventures and all those unique experiences one can find far away from the tarmac and the rest of the road cycling community. A super durable aluminum wheel made of reliable components that supports you for endless miles of troublefree riding pleasure. Ready to explore the world? With the GR 1600 you definitely are. - 350 based hub

Building a wheel that performs well anywhere is the idea behind the ER 1600. The wide rim and superb ratchet drive system bring traction and reliability into the mix and provide a wheel that is perfect for year round riding on road or mixed terrain. The 23mm rim height offers a better climbing wheel while the 32mm height is a stout for those that are hard on their wheels. - 350 based Spline hub - Straight-pull hub and spokes are laced 2-cross - Includes tubeless ready tape and tubeless valve

Snappy acceleration is what you can expect from this aluminum wheel developed to meet all cross country needs. If, to you, cross country means high-speed, after-work rides, and the occasional endurance race, then you should have a closer look at the XR 1700 SPLINE wheels. With a light and welded cross country aluminum rims, reliable 36T RATCHET SL hubs, and Swiss precision finish, all the way from the competition spokes to the signature DT Swiss wheel build quality, it's a wheelset that is up to competing, day-in, day-out, against yourself, against your buddies, or in an all-out race.

DT's benchmark setting aero+ rim matched to a mix of top and end spokes and premium hub makes for a wheel that delivers in all conditions. Fitting 28mm tires to it's wide rims will give you all the comfort and grip needed for mixed surface rides. Using 25mm tires will aero-optimize your race bike. - Spline 240S based hub - Straight-pull hub/spokes built with 2-cross pattern - Includes factory installed tubeless tape, tubeless valve and valve guard

Made for modern XC tracks—240 hub + 30 mm carbon rim = super-fast! Tailored to the needs of performance-oriented cross-country riders, the XRC 1501 SPLINE ONE leaves nothing to be desired. The light, 30mm-wide carbon rims offer ideal support for modern XC tires. Rolling on race-proven and super-durable 240 hubs with RATCHET EXP freehub system, every bit of your energy is transferred into forward motion via equally racy double-butted spokes and a perfect wheel build.

EXC 1501 SPLINE ONE combines everything a modern enduro rider wants in a wheel. The 30 mm wide carbon rim gives you the precision to stay on track even on the trickiest lines while a 240 hub keeps it spinning. Both components are held together by performance weight optimized competition race straightpull spokes. - Designed for Enduro applications - Carbon rim with 30mm internal width - 240 hub - Competition race spokes and Squorx nipples

Nowadays, road riding is much more than riding aon a road. Gravel, rough roads, fenders, lights and racks have broadened the horizon and ER 1400 is the premium alloy choice. It's 20mm, super light and resilient rim and 240s based hub is just what you need when rides lead into the unknown. - 240s based Spline hub - Straight-pull hub and spokes are laced 2-cross - Includes tubeless ready tape and tubeless valve

When heavy duty riding is your passion, the C 1800 is the right partner fro any mission. It is right at home at anything from jumping obstacles, cutting through mud and sprinting up steeps. Trademark DT Swiss reliability coming from precision hubs, sturdy bladed spokes and superb wheel build guarantee trouble free rides. - Spline hub with 3-pawl system - Straight-pull hub and spokes are laced 2-cross - Includes tubeless ready tape and tubeless valve

Enter the Cross-Country world with the X 1900 Spline wheels. The 25 mm wide aluminum rim offers modern tires the support needed to ride low air pressure in order to minimize rolling resistance. Meticulous wheel building by hand ensures the highest quality and reliability, allowing riders to just focus on the moment - whether it is beating the sweat out of their opponents or beating their own KOM or QOM.

The XMC 1200 Spline is the ultimate all mountain wheel. A carbon layup specifically tuned for all mountain use makes the rim tough yet super-light. The hubs feature the latest incarnation of DT's Ratchet System. Extremely refined machining and fully lasered graphics make them the lightest hubs DT Swiss has ever made. Together with bladed top-end spokes and perfect DT Swiss build quality, this wheel is made to ride trails with speed and confidence. - Requirement-specific carbon rims are designed for the ultimate all-mountain riding experience - The carbon rim combined with the DT Aerolite and DT Aero Comp spokes ensure perfect wheel stiffness - The low weight of the 1200 Spline reduces the moment of inertia and increases acceleration, leading to higher average speeds compared with aluminum wheels with the same energy input - Alloy presta valve is lightweight - Wheels are tubeless ready, with a rim design that ensures a precise and safe fit of the tire even when ridden hard - Nipples have DT Pro Lock to prevent the spoke-nipple connection from loosening - Rear wheel has a SRAM XD freehub body mounted, but includes a Shimano Micro Spline freehub kit - EXP ratchet system for a lighter, stiffer, and more durable hub

When motor assistance and leg power meet, the range of terrain a bike can conquer grows almost exponentially. The H 1900 SPLINE is designed for this, now upgraded with the famous DT Swiss Ratchet technology. The Ratchet LN system distributes the combined forces from the rider and the motor over a larger area than the previous pawl freehub systems, increasing the systems’ durability thanks to lower load peaks. The 370 hub enables full power transmission to the ground with reinforced hybrid spokes laced to a resistant aluminum rim, available in two inner widths. - Aluminum rim, Hooked / Crotchet tubeless ready - DT Hybrid 1 spokes are reinforced and increase the lateral and torsional stiffness of the wheel - 370 Hub - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

Increase the agility of lightweight eMTBs using this specific aluminum wheelset. Aligned to the purpose of lightweight eMTBs, the HX 1700 SPLINE LS aim for the right balance between lightness and resistance for more dynamic handling. The 350 hubs have been redesigned for eMTB to offer more resistance to the acceleration and braking forces. In addition, the spokes have been modified to increase their strength without drastically increasing the weight. These wheels are ready to be ridden on the fastest lines in technical sections and to carve into fast and tight turns. - Built to provide enhanced riding agility for light eMTBs - Agility-focused aluminum rims are light, yet resistant; helping to enable agile riding - New Hybrid-specific spokes for an advanced riding experience, combining resistance and lightweight - Built with the 350 Hybrid LS hub for enhanced reliability and contained weight

- Large oversized flange for improved bracing angle making a stiffer wheel - Larger bearings spaced wider apart for better stability and durability - 30mm internal width tubeless ready rim

Sta-Tru Double Wall Rear Wheels. - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Valve: Schrader - Tire Type: Clincher

After a long climb, the perfect trail lies ahead of your tires: flowy, dusty, varied, endless. Nothing holds you back from entering the All-Mountain thrills with the M 1900 Spline wheels. A rim developed with optimal balance of durability and weight offers efficient climbing characteristics as well as dent resistance on single trails. With experienced wheel building by hand, this wheel is a reliable partner to collect freewheeling moments in the mountains. - Intended use = XC and All-Mountain/Trail - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

Wherever the road takes you, the ERC 1400 wheels with AERO+ optimized rim profiles allow you to stay in control during your extended endurance ride. Ride longer distances effortlessly thanks to wider and more comfortable tires. Each pedal force is transferred into propulsion and speed onto the 240 DICUT Aero hub and DT aero comp t-head spokes. Simply enjoy your ride along the way. - Fast and light, Aero-optimized wheels for those longer rides on various terrains along your route. Ride comfortably and handle your bike safely even in fast descends

The SES 2.3 is purpose-built for the mountains. Ultra-light, respectfully aerodynamic, and optimized for tubeless tires, the SES 2.3 raises the bar for performance through hilly and mountainous terrain. - Carbon fiber consctruction using continuously running fibers throughout the rim, tapering laminates, and removing excess material - 28mm front and 32mm rear rim depths provide crosswind stability and flatland aerodynamic efficiency to descend confidently and carry speed in the flat valleys between climbs - Hookless bead tubeless technology reduces weight, improves comfort, maintains strength, and ensures an exacting rim bead seat - Premium Road Hubs bring efficiency, longevity, and simplicity: Cold-forged and machined 6061 alloy for durable lightweight performance - Tubeless and disc brake only

The Rampage rear wheel features a sealed bearing hub, 14mm axle and a Rampage double-walled rim. - Includes Stolen PVC rim strip - Hub/Brake Compatibility: Rim Brake - Wheel Size: 20" - ISO Diameter: 406 / 20" BMX - Valve: Schrader - Tire Type: Clincher - Rear Axle: 14mm Threaded x 110mm - Driver: 1-pc chromoly RHD or LHD - Driver Bearings: 6802 (x2), Verify bearing number on side of rubber seal - Driver Pawls: 3 Pawl - Driver Spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub Shell Bearings: 6902 (x2) Verify bearing number on side of rubber seal - Spokes: 183mm (3X) Black w/Black Brass nipples - Drilling: 36h only - Weight: 45.4 oz

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs Specs: - Hub Model: E-SYNC - Freehub Body: Shimano HG - Wheel Tire Type: Tubeless Ready - Wheel-Brake Comp.: Disc IS 6-bolt - Rim Material: Aluminum - Spoke Type: Sapim D-Light - Valve: Presta - Rim Construction: Double wall

The Rampage rear wheel features a sealed bearing hub, 14mm axle and a Rampage double-walled rim. - Includes Stolen PVC rim strip - Brake Compatibility: Rim Brake - Wheel Size: 20" - ISO Diameter: 406 / 20" BMX - Valve: Schrader - Tire Type: Clincher - Axle: 3/8" chromoly (Heat-treated) - Hardware: Steel (17mm wheel nuts) - Hub Shell Bearings: 6000 (x2) Verify bearing number on side of rubber seal - Spokes: 187mm (3X) Black w/ Black Brass nipples - Drilling: 36h only - Weight: 32.5 oz

- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires - Durable 6069 aluminum with welded joint and reinforced spoke bed - BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build - Reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride.

The Rampage rear wheel rolls on a four-bearing sealed cassette hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system. - Axle: 14mm chromoly (heat-treated) - Driver: 1-pc chromoly RHD or LHD - Driver bearings: 6802 (x2), verify bearing number on side of rubber seal - Driver pawls: 3 Pawl - Driver spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub shell bearings: 6902 (x2) verify bearing number on side of rubber seal - Drilling: 36H - Weight: 45.4-ounces

CZR i30 wheels were designed to handle it all, which is why they feature a strategically reinforced carbon layup and are hand built using double-butted spokes, brass nipples and high-engagement hubs featuring top-tier bearings and oversized freehub seals to establish themselves as wheels that simply won't quit. Solid Strip & TCS Tape - Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 3-Cross Lacing & Brass Nipples - Too many companies are trying to save weight by offering "enduro" wheels with 2-cross lacing patterns and inadequate alloy nipples. While those are suitable for XC and light trail usage, there's no replacement for the long-term reliability of a 3-cross lacing pattern with brass nipples holding it all together. Frequency Hub - The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Heavy-Duty Pawl Springs - CZR i30 wheels feature heavy-duty pawl springs that engage with greater force to counteract the additional torque caused by sudden cranking on steep trails. We also offer a Light Pawl-Spring Kit that can be purchased separately for CZR i30 riders who prefer a quieter hub with lighter pawl engagement. Usage: Trail, Enduro

Sta-Tru Double Wall Front Wheels. - Hub/Brake Compatibility: Rim Brake - Wheel Size: 26-inch x 1 3/8 - ISO Diameter: 590 / 26 x 1 3/8-inch - Front Axle: 3/8-inch x 100mm - Valve: Schrader - Tire Type: Clincher

Sta Tru Rear Wheels - Single Wall rim - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Valve: Schrader - Tire Type: Clincher

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs

Give 'em your worst Aggressive with a downright surly attitude, the new Aeffect R wheelset was built to provide you with category-leading Trail to Enduro good times with a 30mm-wide, offset 6069 alloy rim and new Trace hub to make for an unstoppable combo of toughness and durability. Rough And Rowdy Made to handle all kinds of Enduro and all-mountain punishment, the burly Aeffect R rim sports a 30mm inner width and is born tubeless ready. Balance is Key Aeffect R sports a stout, 6069 alloy rim with a 4.5mm-offset spoke bed to provide spoke tension balance, increasing wheel stiffness and overall fatigue life. No Frills, All Thrills The new Trace hub doesn't need flash or gimmicks. Highlights include: durable cartridge bearings, no-nonsense 10-degree engagement, a tough steel axle, and all relevant cassette body options. This hub will get the job done, ride after ride.

- Gusset's bestselling BMX, dirt jump and street use wheels - Black Dog 32mm 6061 alloy double wall rims with loose-ball alloy hubs, black spokes - Flip/flop freewheel threaded rear - Heat treated CrMo axle with room for pegs

The CADEX 36 Disc WheelSystem is a versatile, lightweight composite wheel built for real-world performance. Featuring a hookless rim design with optimal 22.4mm internal width and 36mm depth, it delivers unbeatable acceleration and climbing efficiency as well as confident handling on descents, in the wind and on varied terrain. - Precision reinforced lay-up places carbon fiber only where needed, creating a strong, stiff rim structure weighing in at only 1302 grams. - Dynamic Balanced Lacing technology produces a stiffer, more efficient wheel with outstanding power transfer. - High tensile strength CADEX aero carbon spokes minimize lateral flex for more efficient acceleration and climbing. - The 22.4mm inner rim width creates an increased actual tire contact patch for better traction and impact absorption, better handling, more confidence and less rider fatigue. - CADEX hookless rim technology features a broad inner rim width and durable continuous carbon fiber structure, helping create a rounder tire shape for superior grip and handling plus added sidewall support when cornering, all without compromising weight. - The precision machined low-friction R1-C30 hub significantly reduces bearing load as CADEX ceramic bearings further increase efficiency by offering lower rolling resistance and 1.5x smoother action than steel. - A low 36mm rim profile offers excellent stability in shifting winds.

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs Specs: - Wheel Tire Type: Tubeless Ready - Wheel-Brake Comp.: Disc IS 6-bolt - Rim Material: Aluminum - Spoke Type: Sapim D-Light - Valve: Presta - Rim Construction: Double wall

The HXC 1501 SPLINE ONE LS are extra lightweight carbon eMTB wheels are engineered for riders looking for outstanding agility. Thanks to the low weight carbon rims, riders benefit from increased agility and dynamism when going uphill and downhill, while withstanding the increased torques of eMTBs. The spokes were designed with specific diameters to align light weight and resistance. Inside the 240 hub, oversized bearings support the additional loads of eMTBs. Each component has been designed with the specific aim of delivering advanced agility to find flow and fun on the trails. - Built to provide ultimate riding agility for light eMTBs - Perfect balance between low weight and resistance, ready to go faster in the ups and the downs - Hybrid-specific spoke design provides an advanced riding experience, combining resistance and lightweight - The 240 Hybrid LS hub features larger bearings for improved durability and rolling efficiency - Ratchet EXP OS, optimized for the requirements of an eMTB, with a bigger threaded ring for direct acceleration through a torque-resistant freehub system

Proterra Light i23 wheels check all the boxes for a fast and light alloy wheelset. The 23mm inner rim width provides the optimal tire profile for adventure road and gravel tires ranging from 30-42mm. Its open-cavity profile features thin, weight-optimized walls that provide the perfect blend of stiffness, resilience, and efficiency. Subdued graphics on a bead-blast finish ensure these wheels won't clash with the colors of your dream bike. We didn't skimp on hubs either. Top-tier EZO bearings, a swift 6-pawl freehub, and 3.7 degrees of engagement provide the look, sound, and feel you expect of a high-end tubeless wheelset. - 23mm inner rim width with 28 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim that is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge alloy nipples minimize rotational weight, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - Center Lock rotor mounts

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs

CRC 1400 Spline wheels are ready to conquer the harshest conditions with convenience. Never mind if the conditions are windy, muddy or rainy, the CRC 1400 Spline is ready to conquer them all. The aero-optimized rim supports your high speeds on descents and on the hunt for your competitors, no matter where the wind blows. The rim profile is tubeless ready, allowing you to take advantage of the technology and simply and conveniently change the tires according to the prevailing conditions of the track. This will ensure you always find the sweet spot between traction and rolling resistance.

Excellent aerodynamics and safe steering behavior for a decisive competitive advantage; the ARC 1100 DiCut wheels are made to go flat out fast. Drag and steering movements are reduced thanks to the AERO+ rim that's been aerodynamically optimized by Swiss Slide- these high-end quality wheels are ready to win.

- Black Ops DW1.1 wheelsets for popular modern day BMX and wheelie bikes - Black Ops MX1100 hubs with sealed bearings and laced with DT spokes - 24mm inner rim width supports a variety of modern sizes - OLD: Front: 100mm, Rear: 110mm - Gears: Singlespeed freewheel - Type: Tube only - Size: 29-inch

- Campagnolo's first dedicated gravel wheel - UD carbon fiber with laquerless finish, ASTM 2 & DIN EN 17406 Category 2 certified - Proprietary 2-way fit technology, no need for tubeless tape - Asymmetrical rim profile with mini-hook to sustain higher pressures on smaller tires, 25mm internal width can handle 38mm up to 76mm tires - 1485g wheelset weight, 120kg weight limit

The ENVE 65 is a modern speed specialist in every way. Triathletes and road racers seeking PRs in their objectives against the clock will find their efforts rewarded by the ENVE 65. - Application: Road Race, Triathlon, Time-Trial - Internal Rim Width: 21mm - Compatible Tire Size: Tubeless 25c or larger - Wheelset Weight: 1641g - Real World Foundation Aero Technology - Wide Hookless Bead provides pot-hole protection - Tubeless Optimized for Rolling Fast and Fewer Flats - Lifetime Incident Protection and 5 Year Factory Warranty - Handmade in Ogden, Utah

- Black Ops DW1.1 wheelsets for popular modern day BMX and wheelie bikes - Black Ops MX1100 hubs with sealed bearings and laced with DT spokes - 24mm inner rim width supports a variety of modern sizes - OLD: Front: 100mm, Rear: 110mm - Gears: Singlespeed freewheel - Type: Tube only - Size: 20-inch

Proterra Light i23 wheels check all the boxes for a fast and light alloy wheelset. The 23mm inner rim width provides the optimal tire profile for adventure road and gravel tires ranging from 30-42mm. Its open-cavity profile features thin, weight-optimized walls that provide the perfect blend of stiffness, resilience, and efficiency. Subdued graphics on a bead-blast finish ensure these wheels won't clash with the colors of your dream bike. We didn't skimp on hubs either. Top-tier EZO bearings, a swift 6-pawl freehub, and 3.7 degrees of engagement provide the look, sound, and feel you expect of a high-end tubeless wheelset. - 23mm inner rim width with 28 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim that is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge alloy nipples minimize rotational weight, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - Center Lock rotor mounts

CZR i23 gravel wheels are designed to minimize weight while blending stiffness and compliance to maximize power transfer and increase comfort. CZR i23 rims feature a 24mm section depth to maximize energy transfer, reduce weight, improve vertical compliance, and reduce rider fatigue while a hooked bead also improves tire retention with high-pressure adventure road and gravel tires. CZR I23 CARBON RIMS Reinforced spoke beds improve overall wheel strength and durability while also minimizing weight in areas where less strength, and therefore material, is needed. CZR i23 rims feature 3mm of asymmetrical spoke offset and a 24mm section depth to improve radial stiffness and maximize energy transfer without being affected by crosswinds like other wheels with deeper profiles. SOLID STRIP & TCS TAPE Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 2-CROSS OR 3-CROSS LACING CZR i23 gravel wheels with 24 spokes feature a 2-cross lacing pattern to increase radial stiffness and decrease weight. CZR i23 wheels with 28 spokes feature a 3-cross pattern to increase durability while still providing ample radial stiffness due to the additional spokes. FREQUENCY HUBS The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Frequency hubs laced to CZR i23 wheels feature lightweight pawl springs that minimize drag and therefore improve efficiency for drop-bar usage. AERODYNAMIC WING SPOKES Pillar racing spokes that are cold-forged into an aerodynamic wing shape that reduces drag at the trailing end of each spoke. As a result, wing spokes improve overall efficiency while still retaining the gram-conscious weights of traditional bladed spokes. SAPIM ALLOY NIPPLES All CZR i23 wheels feature time-tested Sapim alloy nipples to further reduce overall wheel weight while still exceeding the durability requirements of gravel. Countless Configurations CZR i23 wheels are available in a 24-spoke option for riders looking to minimize weight and increase compliance, while the 28-spoke versions are best for heavier or more aggressive riders who prioritize stiffness and durability. All CZR i23 wheels are available with Centerlock or 6-bolt rotor mounts. CZR i23 front wheels use a 12x100mm Frequency hub, but 15mm end caps are also available separately. Why Choose CZR i23? Fast and light CZR i23 gravel wheels were designed to minimize weight and maximize compliance on rough gravel roads. With front-wheel weights starting at 620g and rears at 775g, they also deliver the greatest strength-to-weight ratio of any gravel wheelset on the market. We even stand behind them with our Ride With Confidence Guarantee for those few-and-far-between crash replacement cases.

- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

- Origin8 Bolt high profile T700 UD carbon tubeless ready clincher with 255C high TG epoxy resin and Basalt braking surface - Origin8 Elite road hubs with anti-bite Shimano cassette body featuring 6 pawl/48 point/7.5-degree engagement - 20 hole QR front/24 hole QR rear road hubs laced with straight pull Sapim CX-Ray spokes - Weight: 708g front/850g rear - ISO-Road certified and assembled in the USA - Width ID (mm): 17.5 - Axle: QR - Rim Color: Blk - Rim Model: OR8 Bolt Carbon Road - Hub Model: OR8 RD-1110 Elite Road - O.L.D.: 100mm/130mm - Hub Color: Blk - Gears: 8-11s Cass - Brake Type: Rim - Spoke Type: Sapim CX-Ray BK - Spoke Count: 20F/24R - Wall: Dbl - Valve: PV - Type: Tubeless Compatible

Find the road less travelled on the new EA70 AX. Joining forces with the EA70 and EC70 AX Bar in our AX adventure road line, the new EA70 AX wheel has the durability to withstand trail riding but is translated to drop bar applications with center lock hubs and 11-speed road compatibility. From bikepacking adventures loaded with gear, to washboarded gravel descents with only your wheels and tires providing the compliance, we have you covered. The welded tubeless ready rim boasts a generous 24mm internal rim width that increased tire volume and gives an optimal tire profile for 35 to 50C tires. It’s the perfect wheel to round out any adventure drop bar build.